This rotary table supports three ER collet sets, offering a wide range of clamping sizes:
ER16 – 12-Piece Collet Set (Range: 1/32" – 3/8")
ER20 – 14-Piece Collet Set (Range: 1/16" – 1/2")
ER25 – 12-Piece Collet Set (Range: 1/8" – 5/8")
Tight Clamping Force The angled slot ensures tight clamping force and prevents dust and iron filings from entering, thereby avoiding the accuracy of the chuck being affected.
Premium Spring Steel Our collet set is constructed of hardened, precision-ground high-grade 45# steel for durability, with a rust-resistant finish.
High Accuracy Collets The holding force of this high-precision spring collet is better than that of the ordinary one, and the accuracy can be controlled within 0.0005".
A rotary table is used to rotate a workpiece precisely during machining, allowing for accurate creation of circular features, angles, and indexing tasks.
A chuck is used to securely hold and grip a workpiece on a machine tool, ensuring it remains stable and aligned during operations like turning, drilling, or milling.
3"/ 80 mm Rotary Table
Small low profile Rotary Table for Milling operation with Table Diameter - 3 Inches (80 mm) Vertical Height - 1-5/8 Inch
Gear Ratio - 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees.
Base Dimensions: 4. 1/8" x 3. 1/4" 4 T-Slots: 5/16"
Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position.
Chuck 50mm 3 Jaw Self Centering
Precision 50 mm 3-Jaw Self-Centering Lathe Chuck
Compatible with M12 x 1 mm threading
Chuck 50 mm 4 Jaw Self Centering
Precision 50 mm 4-Jaw Self-Centering Lathe Chuck
Compatible with M12 x 1 mm threading
Chuck 50 mm 4 Jaw Independent
Precision 50 mm 4-Jaw Independent Lathe Chuck
Compatible with M12 x 1 mm threading
Chuck 65 mm 3 Jaw Self Centering
Precision 65mm 3-Jaw Self-Centering Lathe Chuck
Compatible with M14 x 1 mm threading
Chuck 65 mm 4 Jaw Self Centering
Precision 65mm 4-Jaw Self-Centering Lathe Chuck
Compatible with M14 x 1 mm threading
Chuck 70 mm 4 Jaw Independent
Precision 70 mm 4-Jaw Independent Lathe Chuck
Compatible with M14 x 1 mm threading
Chuck 80 mm 3 Jaw Self Centering
Recess is 55 mm Total Height excluding the jaws (Only Body) : 45 mm. The Back plate is drilled with M6 size tapped holes for the chuck's bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table's T slots.
80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this.
The Chuck body is made of high grain casting and the jaws are made of hardened tool steel for a long life. The chuck recess is 55 mm same as that of the back plate. The back plate has a 13.9 mm small spigot that helps it in centrally locate it in the center of the Rotary Table.
Chuck 80 mm 4 Jaw Independent
80 mm 4 Jaw Independent Chuck with a Backplate & 3 Sets of T-Nuts
The other side of the Back plate has a small spigot to fit /adjust into the center of the Rotary table for better accuracy and Fitting. Supplied with Fixing T nuts Bolts.
Body is made of Graded Casting. Jaws are of Alloy Tool Steel -Hardened and Ground
Supplied with a Tool Steel Back Plate having same recess as that of the chuck. The plate is threaded drilled in a manner that the chuck can be screwed to the Back Plate
The Back plate has been counter drilled to fit to our 3"/ 80mm & 4"/ 100 mm Rotary tables.
About The Brand
Buyohlic is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, Buyohlic is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, Buyohlic's products are sold in more than 200 countries.
Used for Tapping a drilled hole manually at one machine location, without actually moving the work piece.
Ensures identical centerline of the tap & the drilled hole.
Hardened & Precisely V Ground Jaws
Tap Holding Capacity: 5/32" to 1/4" Overall Length: 7" (Shank Length: 4" Inches) Shank Diameter : 3/8"
About The Brand
Buyohlic is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, Buyohlic is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, Buyohlic's products are sold in more than 200 countries.
4" (100mm) 3-Slot Rotary Table with ER Adaptor, T-Nuts & Spanner
Product Overview:
Upgrade your precision machining with this 4" (100mm) 3-Slot Rotary Table, designed for milling, drilling, and indexing applications. Its sturdy construction and compact size make it perfect for small to medium-scale machining.
Equipped with an ER Adaptor, this rotary table provides a reliable tool-holding system. The set also includes T-Nuts for secure mounting and a spanner for easy adjustments. Choose from ER16, ER20, or ER25 collet sets based on your requirements.
Key Features:
✅ Compact 4" (100mm) Rotary Table – Ideal for precision machining tasks.✅ 3-Slot Mounting Design – Offers stable and secure workpiece positioning.✅ ER Adaptor Compatibility – Supports ER16, ER20, and ER25 collet sets.✅ Includes T-Nuts – Ensures firm mounting on milling machines.✅ Heavy-Duty Build – Made from high-quality, hardened steel for durability.✅ Spanner Included – Allows for quick and easy collet changes.
Collet Set Options & Sizes:
Choose from three different ER collet sets for flexible tool clamping:
🔹 ER16 – 12-Piece Collet Set (Range: 1/32" – 3/8")
1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8"
🔹 ER20 – 14-Piece Collet Set (Range: 1/16" – 1/2")
1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 1/2"
🔹 ER25 – 12-Piece Collet Set (Range: 1/8" – 5/8")
1/8", 3/16", 7/32", 1/4", 5/16", 3/8", 13/32", 7/16", 1/2", 17/32", 9/16", 5/8"
Applications:
✔️ Precision Milling & Indexing✔️ Drilling, Slotting & Engraving✔️ Circular & Repetitive Workpiece Machining✔️ Industrial & Hobbyist Use
Why Choose This Rotary Indexing Table?
🔹 Compact and efficient for high-precision machining.🔹 Compatible with multiple ER collet sizes for versatility.🔹 Robust and long-lasting construction for industrial applications.
📦 What’s Included?
1x 4" (100mm) 3-Slot Rotary Table
1x ER Adaptor
1x Spanner
1x Set of T-Nuts
1x Collet Set (Choose from ER16, ER20, or ER25)
🚀 Ships Within 1 Business Day – Order Now! 🚀
This rotary table supports three ER collet sets, offering a wide range of clamping sizes:
ER16 – 12-Piece Collet Set (Range: 1/32" – 3/8")
ER20 – 14-Piece Collet Set (Range: 1/16" – 1/2")
ER25 – 12-Piece Collet Set (Range: 1/8" – 5/8")
Tight Clamping Force The angled slot ensures tight clamping force and prevents dust and iron filings from entering, thereby avoiding the accuracy of the chuck being affected.
Premium Spring Steel Our collet set is constructed of hardened, precision-ground high-grade 45# steel for durability, with a rust-resistant finish.
High Accuracy Collets The holding force of this high-precision spring collet is better than that of the ordinary one, and the accuracy can be controlled within 0.0005".
This rotary table supports three ER collet sets, offering a wide range of clamping sizes:
ER16 – 12-Piece Collet Set (Range: 1/32" – 3/8")
ER20 – 14-Piece Collet Set (Range: 1/16" – 1/2")
ER25 – 12-Piece Collet Set (Range: 1/8" – 5/8")
Tight Clamping Force The angled slot ensures tight clamping force and prevents dust and iron filings from entering, thereby avoiding the accuracy of the chuck being affected.
Premium Spring Steel Our collet set is constructed of hardened, precision-ground high-grade 45# steel for durability, with a rust-resistant finish.
High Accuracy Collets The holding force of this high-precision spring collet is better than that of the ordinary one, and the accuracy can be controlled within 0.0005".
This rotary table supports three ER collet sets, offering a wide range of clamping sizes:
ER16 – 12-Piece Collet Set (Range: 1/32" – 3/8")
ER20 – 14-Piece Collet Set (Range: 1/16" – 1/2")
ER25 – 12-Piece Collet Set (Range: 1/8" – 5/8")
Tight Clamping Force The angled slot ensures tight clamping force and prevents dust and iron filings from entering, thereby avoiding the accuracy of the chuck being affected.
Premium Spring Steel Our collet set is constructed of hardened, precision-ground high-grade 45# steel for durability, with a rust-resistant finish.
High Accuracy Collets The holding force of this high-precision spring collet is better than that of the ordinary one, and the accuracy can be controlled within 0.0005".
Use of product- A rotary table is used to rotate a workpiece precisely during machining, allowing for accurate creation of circular features, angles, and indexing tasks.
A chuck is used to securely hold and grip a workpiece on a machine tool, ensuring it remains stable and aligned during operations like turning, drilling, or milling.
4"/ 100 mm Rotary Table
Very High Quality 4" /100 mm Regular Rotary Table designed for smaller milling machines
Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
Can be mounted both in Horizontal & vertical position.
Chuck 65 mm 3 Jaw Self Centering
Precision 65mm 3-Jaw Self-Centering Lathe Chuck
Compatible with M14 x 1 mm threading
Chuck 65 mm 4 Jaw Self Centering
Precision 65mm 4-Jaw Self-Centering Lathe Chuck
Compatible with M14 x 1 mm threading
Chuck 70 mm 4 Jaw Independent
Precision 70 mm 4-Jaw Independent Lathe Chuck
Compatible with M14 x 1 mm threading
M6 Clamp Kit
Versatile M6 clamp kit designed specifically for use with 3" and 4" Rotary Tables.
Compatible with both Horizontal and Tilting models of the specified Rotary Tables.
Comprehensive set includes 2 step blocks, 2 tee bolts with flanged nuts, and 2 clamps.
Each bolt features a length of 55 mm overall and is threaded with M6 for easy installation.
Ensures secure and stable positioning for precise machining operations.
Crafted with quality materials for durability and long-lasting performance.
Streamlines workflow by facilitating effortless adjustment and fastening.
Ideal for professional machinists and hobbyists seeking reliable tooling solutions.
Use of product- A rotary table is used to rotate a workpiece precisely during machining, allowing for accurate creation of circular features, angles, and indexing tasks.
A chuck is used to securely hold and grip a workpiece on a machine tool, ensuring it remains stable and aligned during operations like turning, drilling, or milling.
4"/ 100 mm Rotary Table
Very High Quality 4" /100 mm Regular Rotary Table designed for smaller milling machines
Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
Can be mounted both in Horizontal & vertical position.
Chuck 65 mm 3 Jaw Self Centering
Precision 65mm 3-Jaw Self-Centering Lathe Chuck
Compatible with M14 x 1 mm threading
Chuck 70 mm 4 Jaw Independent
Precision 70 mm 4-Jaw Independent Lathe Chuck
Compatible with M14 x 1 mm threading
M6 Clamp Kit
This M6 clamp kit is designed for use with 3" or 4" rotary tables.
Includes a set of clamps, bolts, nuts, and T-slot nuts.
Compatible with rotary tables featuring M6 T-slots or mounting holes.
Allows for secure fastening of workpieces onto the rotary table during machining operations.
Made of tool steel for durability and reliability. Provides essential holding power to maintain precision and accuracy.
Used For: A lathe chuck, also referred to as a scroll chuck, is a wood lathe accessory that is used to secure turning blanks. Rather than mount your bowl turning blank on a lathe faceplate, it's easier to turn a bowl using a four-jaw lathe chuck
Premium Quality Construction: Crafted with durability and precision in mind, this wood lathe chuck boasts a sturdy build to withstand rigorous woodworking tasks, ensuring reliability and longevity.
Versatile 4-Jaw Design: Equipped with four independently adjustable and reversible jaws, this chuck provides exceptional versatility, allowing you to securely grip a wide range of wood sizes and shapes with ease.
Effortless Adjustability: The threaded 3/4-16 design enables quick and seamless installation onto your lathe, while the independently adjustable jaws allow precise customization to suit your specific woodworking needs.
Secure and Stable Grip: Engineered to deliver maximum gripping power, this chuck ensures a firm and stable hold on your workpiece, minimizing slippage and enhancing safety during operation.
Smooth Operation: With its smooth rotation and precise alignment, this wood lathe chuck facilitates smooth and efficient turning, enabling you to achieve professional-quality results with every project.
Wide Compatibility: Compatible with a variety of wood lathes, this chuck is ideal for both hobbyists and professional woodworkers alike, enhancing the versatility and functionality of your workshop.
Enhanced Convenience: Whether you're shaping bowls, spindles, or other woodturning projects, this chuck simplifies the process with its user-friendly design and reliable performance.
Durable Construction: Constructed from high-quality materials, this wood lathe chuck is built to withstand the rigors of frequent use, ensuring years of dependable service without compromising on performance.
Upgrade your woodturning experience with the 4-Jaws x 6" Inches Wood Lathe Chuck, designed to meet the demands of discerning craftsmen and woodworking enthusiasts.
