A revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining. General Description :- Made of quality tool steel with hardened point. Shanks are precisely ground to match a concentric run out of +/-0.01 mm High quality ball bearings & taper bearing combination absorbs both radial & thrusts load to guarantee smooth movement Well suited for conventional lathe machines. Morse Taper MT1 : Bearing Body Diameter : 42 mm Bearing Case Body Length : 41 mm OAL :125 mm Number of bearings : 1 x Ball & 1 x Taper Bearing Morse Taper MT2 : Bearing Body Diameter : 44 mm Bearing Case Body Length : 46 mm OAL :140 mm Number of bearings : 1 x Ball & 1 x Taper Bearing Morse Taper MT3 : Bearing Body Diameter : 60 mm Bearing Case Body Length : 60 mm OAL :180 mm Number of bearings : 2 x Ball & 1 x Taper Bearing

Read more less

  A vertical slide on the cross-slide enables the material to be raised or lowered as necessary. Widening the slot in a piece of material by machining along one edge with an end mill is an example. The same is true when all that is required is an initial height setting of work in relation to mill or cutter. The vertical slide admits of quick adjustment. A grinding vice, also known as a grinding clamp or grinding tool vice, is a device used to securely hold workpieces during grinding operations. It is specifically designed to grip and stabilize materials being ground on a surface grinder or a bench grinder. An angle plate is a work holding device used as a fixture in metalworking. A Z-type Angle plate is used to hold vertical slides square to the table during marking out operations. Mini Vertical Slide (90 mm x 50 mm) for Instant Machine Milling on Lathe Specifications: Vertical Travel: 40 mm – Allows for precise vertical adjustments, enhancing the flexibility of your milling operations. Base Dimensions: 50 x 55 mm – Provides a stable foundation for the vertical slide, ensuring secure attachment and reduced vibration. Sliding Table Dimensions: 90 x 50 mm – Offers ample work surface for small to medium-sized milling tasks. Dial Graduated to: 0-50 – Enables precise incremental adjustments for accurate milling operations. Features: High-Grade Casting: Constructed from premium-grade casting material, the vertical slide ensures durability and long-lasting performance under rigorous use. Smooth Finish: Engineered with a smooth surface finish, facilitating smooth and precise movement of the sliding table. Compact Design: Ideal for bench lathes with a swing of up to 150 mm, making it a perfect fit for compact workshop setups. Easy Installation: Designed for quick and straightforward installation on compatible lathes, allowing you to start milling operations with minimal setup time. Steel Grinding Vice 2" (50 mm) For Mini Lathe Vertical Milling Slide 50 mm (2" Inches) Jaw Width -Tool Steel -Precise Ground Vice Hole- Distance and bored to fit exactly on the Tee slots of our below shown mini lathe vertical slide. Horizontal and Vertical Vee in the moving jaws for holding Round jobs in this vice. Z Angle Plate Versatile Mounting Solution: Specifically designed for mounting vertical slides onto machine tools such as milling machines and lathes, this Z-type angle plate provides a versatile and sturdy platform for various machining operations. Precision Machining: Crafted from high-quality materials with precision machining, ensuring exceptional accuracy and stability during vertical slide mounting, allowing for precise machining of workpieces with minimal deflection. Optimal Design: The Z-type configuration offers optimal stability and rigidity, minimizing vibration and ensuring consistent machining performance, even during heavy-duty operations.

Read more less

Use of product-A vertical slide on the cross-slide enables the material to be raised or lowered as necessary. Widening the slot in a piece of material by machining along one edge with an end mill is an example. The same is true when all that is required is an initial height setting of work in relation to mill or cutter. The vertical slide admits of quick adjustment. A grinding vice, also known as a grinding clamp or grinding tool vice, is a device used to securely hold workpieces during grinding operations. It is specifically designed to grip and stabilize materials being ground on a surface grinder or a bench grinder. An angle plate is a work holding device used as a fixture in metalworking. A Z-type Angle plate is used to hold vertical slides square to the table during marking out operations. Mini Vertical Slide (90 mm x 50 mm) for Instant Machine Milling on Lathe Specifications: Vertical Travel: 40 mm – Allows for precise vertical adjustments, enhancing the flexibility of your milling operations. Base Dimensions: 50 x 55 mm – Provides a stable foundation for the vertical slide, ensuring secure attachment and reduced vibration. Sliding Table Dimensions: 90 x 50 mm – Offers ample work surface for small to medium-sized milling tasks. Dial Graduated to: 0-50 – Enables precise incremental adjustments for accurate milling operations. Features: High-Grade Casting: Constructed from premium-grade casting material, the vertical slide ensures durability and long-lasting performance under rigorous use. Smooth Finish: Engineered with a smooth surface finish, facilitating smooth and precise movement of the sliding table. Compact Design: Ideal for bench lathes with a swing of up to 150 mm, making it a perfect fit for compact workshop setups. Easy Installation: Designed for quick and straightforward installation on compatible lathes, allowing you to start milling operations with minimal setup time. Steel Grinding Vice 2" (50 mm) For Mini Lathe Vertical Milling Slide 50 mm (2" Inches) Jaw Width -Tool Steel -Precise Ground Vice Hole- Distance and bored to fit exactly on the Tee slots of our below shown mini lathe vertical slide. Horizontal and Vertical Vee in the moving jaws for holding Round jobs in this vice. Z Angle Plate Versatile Mounting Solution: Specifically designed for mounting vertical slides onto machine tools such as milling machines and lathes, this Z-type angle plate provides a versatile and sturdy platform for various machining operations. Precision Machining: Crafted from high-quality materials with precision machining, ensuring exceptional accuracy and stability during vertical slide mounting, allowing for precise machining of workpieces with minimal deflection. Optimal Design: The Z-type configuration offers optimal stability and rigidity, minimizing vibration and ensuring consistent machining performance, even during heavy-duty operations.

Read more less

A drive center is used to keep something steady and aligned while you work on it. For example, in car repairs, it helps hold parts in place. In machining or lathes, it keeps the piece you're working on centered and steady. Upgrade your wood turning setup with this versatile 4-piece drive center set, designed specifically for lathes equipped with a 2MT Morse Taper headstock and tailstock. This comprehensive set includes: 5/8" Diameter Headstock Spur Center: Ideal for narrow spindles, this center ensures precise grip and stability for detailed turning projects. 1" Diameter Headstock Spur Center: Perfect for standard spindles, providing robust support and alignment for a variety of wood turning tasks. Live Ball Bearing Tailstock Center: Features a cup and point design for smooth operation and minimal friction, enhancing the overall accuracy of your turns. Pointed Tailstock Center: Ensures reliable alignment and stability for a wide range of turning projects. Each component is crafted for durability and precision, making this set an essential addition to any woodturner’s toolkit.

Read more less

About The Brand Buyohlic is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, Buyohlic is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, Buyohlic's products are sold in more than 200 countries.

Read more less

These Drill Stop Bit Collar Set will quickly and easily help you drill holes to exact depths and are ideal for production work and repeated drilling by positively locking anywhere along the bit. Assorted 7 Sizes in a Kit Includes Metric Size stoppers for drill sizes of 3, 5, 6,8,10,11 and 12 mm & Imperial size of 1/16", 3/16”, 1/4”, 5/16”, 3/8”, 7/16” and 1/2-Inch Supplied with an Allen Key Wrench an Allen Key Wrench The Durable Alloy Steel Setscrew Type Collar will stay sturdy when tightened and is specially designed not to damage the bits. With the Setscrew tight the collar will remain securely in place exactly where you put them and will accurately control the depth of the hole you are drilling. Bit Limit Rings are used as a Shaft Collar on machinery and can be used on twist drill bits or brad point drills or any type of bit to prevent excessive drill bit penetration and for any job that uses a bit and needs precision.

Read more less

Use of product- A drill chuck arbor is an essential component used to connect a drill chuck to a machine tool, such as a milling machine, lathe, or drill press. The arbor serves as the intermediary between the machine's spindle and the drill chuck, allowing the chuck to hold various tools like drill bits, reamers, or taps. Key Features: Precision Fit: Engineered with Morse Taper, Jacobs Taper, or Threaded, this arbor provides a seamless connection between your machine's spindle and the drill chuck. High-Quality Construction: Made from premium-grade hardened steel, this arbor is built to withstand rigorous use and maintain its integrity over time. Versatile Application: Ideal for use with [machine types, e.g., drill presses, lathes, milling machines], making it a versatile addition to any workshop. Smooth Operation: Ensures minimal runout, providing you with the precision you need for detailed and accurate drilling or machining tasks. Easy Installation: Simple to attach and remove, allowing for quick tool changes and improved workflow efficiency.

Read more less

A vertical slide on the cross-slide enables the material to be raised or lowered as necessary. Widening the slot in a piece of material by machining along one edge with an end mill is an example. The same is true when all that is required is an initial height setting of work in relation to mill or cutter. The vertical slide admits of quick adjustment. A self-centering vice is to automatically center and clamp the workpiece, which saves time and effort compared to traditional vices that require manual adjustment to center the workpiece. This feature is particularly useful when working with cylindrical or symmetrical workpieces that need to be precisely positioned for machining. Lathe Milling Vertical Slide Table Bed Size: 125 mm x 100 mm Provides ample working area for various milling operations. Base Type: Fixed Base Ensures a stable and rigid setup for precise milling. Tee Slots: Number of Tee Slots: 3 Width at the Top of the Tee: 10 mm Width at the Bottom of the Tee: 15 mm Facilitates secure mounting of workpieces and accessories. Compatibility: Specifically designed to allow milling on Myford lathes. Table Movement: Approximately 80 mm of table movement Provides flexibility and range for milling tasks. Construction: Made from high-quality materials for durability and longevity. Precision-engineered to withstand the demands of milling operations. Self Centering Machine Vice- 2" Inch (Jaw Width 50 mm) Maximum Jaw Opening 55 mm, Jaw Depth 28 mm Seasoned High Grain Casting Body, Jaw Width 2" Inches/ 50 mm

Read more less

Quality Quick Change Tool Post Standard Holder - Fits Myford and Similar Lathes (90-115 mm Center Height) A quick change tool post is that it allows machinists to change tools quickly and accurately without the need for extensive recalibration each time. This saves time and increases productivity, especially in situations where multiple tool changes are required during a machining operation. Upgrade your lathe setup with our high-quality Quick Change Tool Post Standard Holder, perfectly suited for Myford and similar lathes with a center height ranging from 90 to 115 mm. Key Features: Premium Material: Crafted from quality tool steel, hardened, and precisely ground to ensure durability and precision. Tool Capacity: This holder accommodates tools up to 12.5 mm, providing flexibility for various machining tasks. Precision Engineering: All parts are hardened and ground with precision for optimal performance. Main Block Dimensions: 58 x 58 x 37 mm (H) with a 7/16" (11.1 mm) bore. Please note: The main block is not included in this listing; dimensions are provided for buyer reference. Exclusions: This listing is for the Standard Holder only and does not include a parting cut-off holder. Ideal for machinists seeking reliable and accurate tool holding solutions, this Standard Holder ensures a stable setup for high-quality results.

Read more less

Maximize your lathe’s capabilities with the T-51 Quick Change Tool Post, expertly designed for Boxford lathes and other models featuring a 125-150 mm center height. This versatile tool post significantly reduces setup time by allowing swift and seamless tool changes, perfect for boosting efficiency in any workshop setting. Key Features: Precision Engineering: Crafted from high-grade materials, ensuring exceptional durability and reliable performance in demanding conditions. Versatile Tool Holding Capacity: The standard holder supports square shank tools with a capacity of 5/8" (16 mm) and a depth of 14 mm, providing secure and stable tool placement for accurate machining. Enhanced Productivity: Ideal for both professionals and hobbyists, the T-51 Quick Change Tool Post helps you achieve consistent results with reduced downtime. Easy Installation: Compatible with Boxford lathes and similar models, this tool post is designed for quick and hassle-free installation. Upgrade your lathe today with the T-51 Quick Change Tool Post and experience improved efficiency, precision, and versatility in all your machining projects.

Read more less

A combination of a vertical slide and a grinding vice is typically used in machining and grinding applications to enhance precision and flexibility. Together, they enable complex machining operations, such as precise grinding of specific features on a workpiece, by allowing for both vertical and horizontal positioning and movement. Vertical slide Dimensions: Size: 125 mm x 100 mm Provides a substantial working area for a variety of milling operations. Base Features: Slots for Clamping: 3 slots in the base allow for secure clamping down. Pitch Circle Diameter (PCD): 46.19 mm Facilitates robust and stable attachment to the lathe. Construction: Made from high-quality materials ensuring durability and longevity. Precision-engineered for stability and accuracy during milling. Usability: Suitable for both hobbyists and professional machinists. Enhances the milling capabilities of the Myford Super 7 ML7 lathe. Applications: Ideal for milling, drilling, slotting, and other precise machining operations. Expands the functionality of the lathe, enabling vertical milling tasks. Precision Steel Grinding Vice - 2-3/8" (60mm) Jaw Width Specifications: Jaw Width: 2-3/8" (60mm) Maximum Jaw Opening: 50mm Distance between Mounting Slots: 75mm Distance between Mounting Holes: 45mm Height (Horizontal Orientation): 45mm Height (Vertical Orientation): 110mm Base Dimensions: 110mm (Length) x 85mm (Width) Features: Hardened Steel Construction: Made from high-quality hardened steel, this grinding vice offers superior strength and durability, ensuring long-lasting performance even in demanding machining environments. Precision Ground Jaws: The jaws of this vice are meticulously ground to ensure precise clamping and positioning of workpieces, allowing for accurate machining operations with tight tolerances. Maximum Jaw Opening: With a maximum jaw opening of 50mm, this vice accommodates a wide range of workpiece sizes, providing versatility for various machining tasks. Secure Mounting: Equipped with tee nuts for secure mounting, this vice offers stability and reliability during machining operations, minimizing vibration and ensuring consistent results. Compact Design: Despite its robust construction, this grinding vice features a compact design with a base dimension of 110mm (Length) x 85mm (Width), making it suitable for use in space-restricted work areas.

Read more less

A mini parting tool is a small cutting tool used in woodworking and metalworking. It's designed for making narrow cuts or grooves in a workpiece, typically for creating small channels, decorative grooves, or for parting off a piece of material from the main workpiece. 6 MM Holder Size:- 6 x 6 x 80 mm Blade Size is 1.5 x 6 x 63 mm Tool Center Height is 7 mm 8 MM Holder Size:- 6 x 6 x 80 mm Blade Size is 1.5 x 6 x 63 mm Tool Center Height is 9.5mm 10 MM Holder Size:- 6 x 6 x 80 mm Blade Size is 1.5 x 6 x 63 mm Tool Center Height is 10.06 m   Epoxy Black finish for a long rust free life. Supplied with Blade size of 1.45 x 5 x 63 mm along with Allen key along

Read more less