This is a precision-engineered Shoulder and Face Milling Cutter used in both CNC and Manual Milling Machines. Compatible with ISO APMT1135 carbide inserts, it ensures cost-effective and efficient machining compared to traditional HSS tools. The cutter body is hardened to 45–50 HRC, offering excellent wear resistance and long tool life.
Each variation clearly defines:🔹 Dia (Diameter) – e.g., 16 mm🔹 Len (Overall Length) – e.g., 150 mm / 200 mm/ 250 mm / 300 mm /350 mm /400 mm /500 mm etc.🔹 Shank – e.g., 16 mm /15 mm /15.6 mm Weldon-type Shank
The insert pockets are tightly machined to eliminate any gap between the insert and seat, ensuring smooth cutting. Run-out tolerance is maintained through center-to-center grinding. The tool also includes center holes on both ends for precise setup.
Variants marked with:
SDL indicate Shank x Dia x Length mm
2T denote 2 Pocket (2 Teeth) tools for higher productivity.
🎁 Includes 10 Free APMT1135 Carbide Inserts with every unit.
This milling cutter is a durable and reliable solution for a wide range of machining applications.
This is a precision-engineered Shoulder and Face Milling Cutter used in both CNC and Manual Milling Machines. Compatible with ISO JDMT0702 carbide inserts, it ensures cost-effective and efficient machining compared to traditional HSS tools. The cutter body is hardened to 45–50 HRC, offering excellent wear resistance and long tool life.
Each variation clearly defines:🔹 Dia (Diameter) – e.g., 14 mm🔹 Len (Overall Length) – e.g., 150 mm 🔹 Shank – e.g.,14 mm Weldon-type Shank
The insert pockets are tightly machined to eliminate any gap between the insert and seat, ensuring smooth cutting. Run-out tolerance is maintained through center-to-center grinding. The tool also includes center holes on both ends for precise setup.
Variants marked with:
SDL indicate Shank, Dia 14 mm, Length 150 mm
3T denote 3 Pocket (3 Teeth) tools for higher productivity
🎁 Includes 10 Free JDMT0702 Carbide Inserts with every unit.
This milling cutter is a durable and reliable solution for a wide range of machining applications.
This is a precision-engineered Shoulder and Face Milling Cutter used in both CNC and Manual Milling Machines. Compatible with ISO JDMT0702 carbide inserts, it ensures cost-effective and efficient machining compared to traditional HSS tools. The cutter body is hardened to 45–50 HRC, offering excellent wear resistance and long tool life.
Each variation clearly defines:🔹 Dia (Diameter) – e.g., 10 mm🔹 Len (Overall Length) – e.g., 100 mm /120 mm etc.🔹 Shank – e.g.,10 mm Weldon-type Shank
The insert pockets are tightly machined to eliminate any gap between the insert and seat, ensuring smooth cutting. Run-out tolerance is maintained through center-to-center grinding. The tool also includes center holes on both ends for precise setup.
Variants marked with:
SDL indicate Shank, Dia 10 mm, Length 100 mm/120 mm etc.
2 T denote 2 Pocket (2 Teeth) tools for higher productivity
🎁 Includes 10 Free JDMT0702 Carbide Inserts with every unit.
This milling cutter is a durable and reliable solution for a wide range of machining applications.
This is a precision-engineered Shoulder and Face Milling Cutter used in both CNC and Manual Milling Machines. Compatible with ISO JDMT0702 carbide inserts, it ensures cost-effective and efficient machining compared to traditional HSS tools. The cutter body is hardened to 45–50 HRC, offering excellent wear resistance and long tool life.
Each variation clearly defines:🔹 Dia (Diameter) – e.g., 12 mm🔹 Len (Overall Length) – e.g., 120 mm / 130 mm etc.🔹 Shank – e.g., 12 mm Weldon-type Shank
The insert pockets are tightly machined to eliminate any gap between the insert and seat, ensuring smooth cutting. Run-out tolerance is maintained through center-to-center grinding. The tool also includes center holes on both ends for precise setup.
Variants marked with:
SDL indicate Shank, Dia 12 mm, Length 120 mm / 130 mm etc.
2T denote 2 Pocket (2 Teeth) tools for higher productivity (vs. standard 3-pocket tools)
🎁 Includes 10 Free JDMT0702 Carbide Inserts with every unit.
This milling cutter is a durable and reliable solution for a wide range of machining applications.
High Performance Tungsten Carbide Cutter Inserts for Lathe, CNC & VMC Machines
Engineered for precision and durability, our Tungsten Carbide Cutter Inserts deliver exceptional cutting performance across a wide range of machining applications. Designed to fit seamlessly into lathe, CNC, and VMC machines holders, these inserts ensure high-speed operations with consistent surface finish and extended tool life.
Manufactured from premium-grade tungsten carbide, these inserts provide excellent wear resistance, heat resistance, and toughness, making them ideal for heavy-duty turning, milling, and facing tasks. Whether you're working with steel, stainless steel, cast iron, or non-ferrous metals, these inserts help achieve precise tolerances and smooth finishes.
Key Features:
Made from high-quality tungsten carbide for long-lasting performance
Suitable for roughing and finishing operations
Compatible with Lathe, CNC, and VMC machines' holders
Excellent wear and heat resistance
Ensures superior surface finish and dimensional accuracy
Available in various geometries and coatings for different materials
Ideal for use in manufacturing, automotive, aerospace, and general engineering industries, these carbide inserts offer a cost-effective solution for high-speed and high-precision machining tasks.
10 Blades Included: The tool comes with a swivel head that adjusts to uneven surfaces. You get 1 blade in the tool and 10 extra BS1010 replacement blades.
Works on Many Materials: Great for cleaning up edges on brass, steel, aluminum, copper, and PVC pipes. Also perfect for auto parts, gears, and 3D printed plastic objects. Ideal for plumbers, machinists, and DIY projects.
Durable HSS Blades: The blades are made from high-speed steel, which is stronger and lasts up to 80% longer than regular steel. They stay sharp and handle tough jobs easily.
Comfortable and Built to Last: The tool has a strong aluminum handle with a comfortable grip, precision-machined parts, and a secure case for storing the extra blades.
🔧 Built to Last – M2 High-Speed SteelCrafted from tough M2 High Speed Steel (HSS) and precision heat-treated, this annular cutter delivers exceptional durability and extended tool life, even under demanding conditions.
⚡ 3–5x Faster Cutting SpeedOutperforming standard HSS cutters, our carbide-tipped annular cutter delivers cutting speeds 3 to 5 times faster. Its three-edge cutting design distributes the workload evenly across all edges, enhancing cutting efficiency, accuracy, and surface finish—perfect for high-performance metalworking.
🛠️ Versatile ApplicationsIdeal for drilling through a variety of materials, including steel, stainless steel, copper, aluminum, and plastics, whether in plate or pipe form. A reliable solution for fabrication, construction, and maintenance tasks.
⚡ Fast & Accurate CuttingEngineered for quick, clean, and burr-free hole cutting in steel and other metals. Far more efficient than traditional twist drill bits, it ensures smooth, precise performance with minimal effort.
📌 Installation & Usage Tips
Align the Weldon shank flats with the securing screws for a stable and secure fit.
Use a recommended cutting fluid instead of water (only lasts 3–5 cuts) to greatly extend tool life.
Optimize RPM and feed rate to maximize efficiency and reduce tool wear.
🔧 Built to Last – M2 High-Speed SteelCrafted from tough M2 High Speed Steel (HSS) and precision heat-treated, this annular cutter delivers exceptional durability and extended tool life, even under demanding conditions.
⚡ 3–5x Faster Cutting SpeedOutperforming standard HSS cutters, our carbide-tipped annular cutter delivers cutting speeds 3 to 5 times faster. Its three-edge cutting design distributes the workload evenly across all edges, enhancing cutting efficiency, accuracy, and surface finish—perfect for high-performance metalworking.
🛠️ Versatile ApplicationsIdeal for drilling through a variety of materials, including steel, stainless steel, copper, aluminum, and plastics, whether in plate or pipe form. A reliable solution for fabrication, construction, and maintenance tasks.
⚡ Fast & Accurate CuttingEngineered for quick, clean, and burr-free hole cutting in steel and other metals. Far more efficient than traditional twist drill bits, it ensures smooth, precise performance with minimal effort.
📌 Installation & Usage Tips
Align the Weldon shank flats with the securing screws for a stable and secure fit.
Use a recommended cutting fluid instead of water (only lasts 3–5 cuts) to greatly extend tool life.
Optimize RPM and feed rate to maximize efficiency and reduce tool wear.
Chamfer cutter for replaceable carbide inserts, set at 60 degree suitable for various chamferring needs.
A Chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 60 degree angle needed for any machining requirement.
Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert)
Pls chose from the dropdown carefully basis your shank size and chamferring requirement.
SKU: 50-JAI-CT20-1 (Int Ref: 3786 )
Shank Size - 20mm , Range 5 to 25 mm, OAL -120 mm, Screw -4 x 10, Torx Key -T15 Pockets -1, Insert Type : TCMT16T3
Chamfer cutter for replaceable carbide inserts, set at 15 degree suitable for various chamferring needs.
A Chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 15 degree angle needed for any machining requirement.
Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert)
Pls chose from the dropdown carefully basis your shank size and chamferring requirement.
SKU: 40-JAI-CT12-1 ( Int Ref 3785 )
Chamfer cutter for 15 degree suitable to TCMT1102 insert
Suitable Screw - 2.5 x 6 Torx key T8
Shank Size - 12 mm - Pocket 1
Chamfer cutter for replaceable carbide inserts, set at 30 degree suitable for various chamferring needs.
A Chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 30 degree angle needed for any machining requirement.
Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert)
Pls chose from the dropdown carefully basis your shank size and chamferring requirement.
SKU: 20-JAI-CT16-1 ( Int Ref 3784 )
Chamfer cutter for 30 degree suitable to TCMT1102 insert
Suitable Screw - 2.5 x 6 Torx key T8
Shank Size - 16 mm - Pocket 1
Enhance your machining precision with our Small 2" Inch Head Diameter Boring Heads, meticulously crafted to meet Imperial Standards. Engineered for accuracy and efficiency, these precision tools are essential for any machining operation requiring meticulous bore sizing.
Features:
Imperial Standards: Designed to meet the exacting standards of Imperial measurements, ensuring precise bore diameters suitable for various machining applications.
Compact Design: With a small 2" inch head diameter, these boring heads are ideal for operations where space is limited or intricate details are required.
High-Quality Construction: Crafted from premium materials, these boring heads are durable and provide consistent performance over prolonged use.
Versatile Compatibility: Compatible with a wide range of machining equipment, these boring heads seamlessly integrate into your existing setup for hassle-free operation.
Fine Adjustment: Equipped with fine adjustment mechanisms, allowing for precise control over bore diameter, depth, and positioning.
Smooth Operation: Engineered for smooth and stable operation, reducing vibration and ensuring superior surface finishes on your machined components.
Wide Application: Suitable for various industries including automotive, aerospace, manufacturing, and more, these boring heads excel in diverse machining environments.
Tools Specifications: Boring Head Diameter 2" Inches. Accepts 1/2" diameter shank tooling. Bore is precisely Ground, pls note. Imperial Standards ( 1 Division = 0.0005 Thou.). Maximum off 5/8"
Buyohlic's Boring Bar Set features bar holders made of durable steel with a protective coating for Rust Free Life. Carbide inserts are tin-coated for moisture and rust resistance, ensuring long-lasting performance.
Carbide inserts can be easily indexed. When one side becomes dull, simply flip to another side—no need to remove the tool from the chuck or tool post. This design saves time and extends tool life.
Invest in precision and reliability for your machining needs with our Small 2" Inch Head Diameter Boring Heads. Upgrade your workshop today!
