{"title":"Live Revolving Centers","description":"\u003cp\u003eSupporting a long workpiece between centers is one of the most fundamental and reliable turning setups in metalworking. The headstock center drives the part through a lathe dog, and the tailstock center supports the far end, keeping the workpiece aligned with the spindle axis while resisting the deflection that cutting forces would otherwise cause. Without this support, long shafts, rods, and slender workpieces would spring away from the cutting tool, producing tapered, irregular, or chattered surfaces instead of the straight, round result required.\u003c\/p\u003e\n\u003cp\u003eA live revolving center at the tailstock solves the friction problem that dead centers create. While a dead center supports the workpiece correctly, it does not rotate with the part. The workpiece end rotates against the dead center's stationary cone, generating friction and heat that will seize and score both the center point and the workpiece center hole. Live revolving centers eliminate this problem by having a rotating tip supported on internal precision bearings. The tip spins with the workpiece, generating no friction, no heat, and no damage to center holes even at high spindle speeds and heavy cutting loads.\u003c\/p\u003e\n\u003ch3\u003eLive Center Specifications That Matter\u003c\/h3\u003e\n\u003cp\u003eRunout is the most important accuracy specification for a live revolving center. Runout refers to the variation in the tip position as the center rotates, measured in radial deviation from the theoretical centerline. A center with high runout introduces a periodic variation in the workpiece centerline position, which produces diameter variation in the turned part and a rough surface finish. Quality live centers achieve runout of 0.005mm (0.0002 inch) or less for precision turning work.\u003c\/p\u003e\n\u003cp\u003eLoad capacity is the maximum radial and axial force the center bearings can sustain without deflection or premature wear. Higher load centers use larger bearing assemblies and are required for heavy roughing operations on large-diameter workpieces where the cutting force at the tailstock support point is substantial. Lighter centers with smaller bearings are appropriate for precision finish turning at moderate loads.\u003c\/p\u003e\n\u003cp\u003eThe Morse taper shank must match your lathe tailstock bore. MT2 is standard on mini lathes and benchtop machines. MT3 is standard on mid-size full-manual lathes. MT4 is used on larger capacity manual and semi-production lathes. Always confirm the tailstock bore size in your machine manual before ordering.\u003c\/p\u003e\n\u003ch3\u003eInterchangeable Tip Systems\u003c\/h3\u003e\n\u003cp\u003eSome Buyohlic live centers have interchangeable tip systems that allow the center cone to be replaced with a pipe center (for supporting hollow workpieces), a half center (for turning up to the tailstock end without clearance interference), or a flat tip (for supporting non-drilled stock ends during light cuts). Interchangeable tip centers eliminate the need for multiple separate center tools for different workpiece geometries.\u003c\/p\u003e\n\u003cp\u003eFor more on Morse taper sizes and compatibility, see our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.buyohlic.com\/collections\/lathes-centers\"\u003elathe centers collection\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand the guide on\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.buyohlic.com\/blogs\/news\/what-is-a-morse-taper-mt1-vs-mt2-vs-mt3-explained\"\u003eMorse taper explained\u003c\/a\u003e. For complete lathe workholding, see\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.buyohlic.com\/collections\/lathe-tools-accessories\"\u003elathe tools and accessories\u003c\/a\u003e.\u003c\/p\u003e\n\u003cstyle\u003e\n.buyohlic-faq{\nmax-width:1200px;\nmargin:60px auto;\npadding:0 30px;\n}\n\n.buyohlic-faq h2{\ntext-align:center;\nfont-size:32px;\nfont-weight:700;\ncolor:#111;\nmargin-bottom:40px;\n}\n\n.buyohlic-faq-item{\nbackground:#fff !important;\nborder:1px solid #e5e5e5 !important;\nmargin-bottom:15px;\noverflow:hidden;\n}\n\nbutton.buyohlic-faq-question,\nbutton.buyohlic-faq-question:hover,\nbutton.buyohlic-faq-question:focus,\nbutton.buyohlic-faq-question:active{\nwidth:100% !important;\ndisplay:flex !important;\njustify-content:space-between !important;\nalign-items:center !important;\npadding:25px 20px !important;\nbackground:#ffffff !important;\nbackground-color:#ffffff !important;\nbackground-image:none !important;\nborder:none !important;\nbox-shadow:none !important;\ncursor:pointer !important;\ntext-align:left !important;\n}\n\nbutton.buyohlic-faq-question::before,\nbutton.buyohlic-faq-question::after{\ndisplay:none !important;\ncontent:none !important;\nbackground:none !important;\nopacity:0 !important;\nvisibility:hidden !important;\n}\n\n.buyohlic-faq-question h3{\nmargin:0 !important;\npadding:0 !important;\nfont-size:20px !important;\nfont-weight:600 !important;\nline-height:1.5 !important;\ncolor:#111 !important;\nflex:1 !important;\n}\n\n.buyohlic-faq-question span{\nfont-size:34px !important;\nfont-weight:400 !important;\ncolor:#111 !important;\nmargin-left:15px !important;\nflex-shrink:0 !important;\n}\n\n.buyohlic-faq-answer{\ndisplay:none;\npadding:0 20px 25px;\nbackground:#ffffff !important;\n}\n\n.buyohlic-faq-answer p{\nmargin:0;\nfont-size:16px;\nline-height:1.9;\ncolor:#555;\n}\n\n.buyohlic-faq-item.active .buyohlic-faq-answer{\ndisplay:block;\n}\n\n@media(max-width:768px){\n\n.buyohlic-faq{\npadding:0 15px;\n}\n\n.buyohlic-faq h2{\nfont-size:24px;\n}\n\n.buyohlic-faq-question h3{\nfont-size:17px !important;\n}\n\n.buyohlic-faq-question span{\nfont-size:28px !important;\n}\n\n}\n\u003c\/style\u003e\n\n\n\u003cscript\u003e\ndocument.addEventListener(\"DOMContentLoaded\", function(){\n\ndocument.querySelectorAll(\".buyohlic-faq-question\").forEach(function(btn){\n\nbtn.addEventListener(\"click\", function(){\n\nconst item = this.parentElement;\nconst answer = item.querySelector(\".buyohlic-faq-answer\");\nconst icon = this.querySelector(\"span\");\n\ndocument.querySelectorAll(\".buyohlic-faq-item\").forEach(function(other){\n\nif(other !== item){\nother.classList.remove(\"active\");\nother.querySelector(\".buyohlic-faq-answer\").style.display = \"none\";\nother.querySelector(\"span\").innerHTML = \"+\";\n}\n\n});\n\nif(answer.style.display === \"block\"){\nanswer.style.display = \"none\";\nicon.innerHTML = \"+\";\nitem.classList.remove(\"active\");\n}else{\nanswer.style.display = \"block\";\nicon.innerHTML = \"−\";\nitem.classList.add(\"active\");\n}\n\n});\n\n});\n\n});\n\u003c\/script\u003e\n\n\u003cdiv class=\"buyohlic-faq\"\u003e\n\n\u003ch2\u003eFrequently Asked Questions - Live Revolving Centers\u003c\/h2\u003e\n\n\u003cdiv class=\"buyohlic-faq-item\"\u003e\n\u003cbutton type=\"button\" class=\"buyohlic-faq-question\"\u003e\n\u003ch3\u003eWhat is the difference between a live center and a dead center?\u003c\/h3\u003e\n\u003cspan\u003e+\u003c\/span\u003e\n\u003c\/button\u003e\n\u003cdiv class=\"buyohlic-faq-answer\"\u003e\n\u003cp\u003eA live (revolving) center has a rotating tip on internal bearings that spins with the workpiece, generating no friction or heat. It is the correct choice for almost all turning operations, especially at higher speeds and heavier feeds. A dead center is a solid non-rotating cone. The workpiece rotates against it, creating friction and requiring lubrication to prevent scoring. Dead centers are only used in high-precision grinding where the minute bearing flex in a live center must be eliminated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"buyohlic-faq-item\"\u003e\n\u003cbutton type=\"button\" class=\"buyohlic-faq-question\"\u003e\n\u003ch3\u003eWhat Morse taper live center fits my lathe?\u003c\/h3\u003e\n\u003cspan\u003e+\u003c\/span\u003e\n\u003c\/button\u003e\n\u003cdiv class=\"buyohlic-faq-answer\"\u003e\n\u003cp\u003eCheck your lathe manual for the tailstock taper specification. MT2 fits most mini and benchtop lathes in the 7-inch to 9-inch swing range. MT3 fits mid-size manual lathes. MT4 fits larger lathes in the 12-inch to 16-inch swing range. If the manual is unavailable, measure the tailstock bore diameter: approximately 0.700 inches = MT2, 0.938 inches = MT3, 1.231 inches = MT4.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"buyohlic-faq-item\"\u003e\n\u003cbutton type=\"button\" class=\"buyohlic-faq-question\"\u003e\n\u003ch3\u003eHow do I mount a live center in the lathe tailstock?\u003c\/h3\u003e\n\u003cspan\u003e+\u003c\/span\u003e\n\u003c\/button\u003e\n\u003cdiv class=\"buyohlic-faq-answer\"\u003e\n\u003cp\u003eWipe both the taper shank and the tailstock bore completely clean and dry. Align the center shank with the tailstock bore and push in with a firm, decisive push until the taper seats with a solid thud. The center is self-locking by the taper friction when seated correctly. To remove, use the tailstock handwheel to retract the quill until the tailstock screw contacts the tang and pushes the center out. Never use a tool to pry a center out of the tailstock bore.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"buyohlic-faq-item\"\u003e\n\u003cbutton type=\"button\" class=\"buyohlic-faq-question\"\u003e\n\u003ch3\u003eHow often should I replace a live center?\u003c\/h3\u003e\n\u003cspan\u003e+\u003c\/span\u003e\n\u003c\/button\u003e\n\u003cdiv class=\"buyohlic-faq-answer\"\u003e\n\u003cp\u003eA quality live center used with proper care should last years in production use. Replace the center when runout increases above the acceptable limit for your work, when the bearings develop roughness or play under hand rotation, or when the center cone shows significant wear at the tip. Regular cleaning of the taper shank and bore, careful handling to avoid drops, and not overloading the center beyond its rated capacity are the main maintenance steps to maximize service life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n\"@context\":\"https:\/\/schema.org\",\n\"@type\":\"FAQPage\",\n\"mainEntity\":[\n{\n\"@type\":\"Question\",\n\"name\":\"What is the difference between a live center and a dead center?\",\n\"acceptedAnswer\":{\n\"@type\":\"Answer\",\n\"text\":\"A live (revolving) center has a rotating tip on internal bearings that spins with the workpiece, generating no friction or heat. It is the correct choice for almost all turning operations, especially at higher speeds and heavier feeds. A dead center is a solid non-rotating cone. The workpiece rotates against it, creating friction and requiring lubrication to prevent scoring. Dead centers are only used in high-precision grinding where the minute bearing flex in a live center must be eliminated.\"\n}\n},\n{\n\"@type\":\"Question\",\n\"name\":\"What Morse taper live center fits my lathe?\",\n\"acceptedAnswer\":{\n\"@type\":\"Answer\",\n\"text\":\"Check your lathe manual for the tailstock taper specification. MT2 fits most mini and benchtop lathes in the 7-inch to 9-inch swing range. MT3 fits mid-size manual lathes. MT4 fits larger lathes in the 12-inch to 16-inch swing range. If the manual is unavailable, measure the tailstock bore diameter: approximately 0.700 inches = MT2, 0.938 inches = MT3, 1.231 inches = MT4.\"\n}\n},\n{\n\"@type\":\"Question\",\n\"name\":\"How do I mount a live center in the lathe tailstock?\",\n\"acceptedAnswer\":{\n\"@type\":\"Answer\",\n\"text\":\"Wipe both the taper shank and the tailstock bore completely clean and dry. Align the center shank with the tailstock bore and push in with a firm, decisive push until the taper seats with a solid thud. The center is self-locking by the taper friction when seated correctly. To remove, use the tailstock handwheel to retract the quill until the tailstock screw contacts the tang and pushes the center out. Never use a tool to pry a center out of the tailstock bore.\"\n}\n},\n{\n\"@type\":\"Question\",\n\"name\":\"How often should I replace a live center?\",\n\"acceptedAnswer\":{\n\"@type\":\"Answer\",\n\"text\":\"A quality live center used with proper care should last years in production use. Replace the center when runout increases above the acceptable limit for your work, when the bearings develop roughness or play under hand rotation, or when the center cone shows significant wear at the tip. Regular cleaning of the taper shank and bore, careful handling to avoid drops, and not overloading the center beyond its rated capacity are the main maintenance steps to maximize service life.\"\n}\n}\n]\n}\n\u003c\/script\u003e","products":[{"product_id":"precision-23mm-mini-lathe-center-revolving-live-center","title":"Long Body Mini Revolving Live Center 23 MM Diameter   Precision Engineered Mini Lathe Center","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUse of product-\u003c\/strong\u003e A Revolving center provides support for the workpiece during rotation on the lathe spindle. In a mini lathe, which is smaller and often used for hobbyist or small-scale machining projects, the revolving center helps maintain precision and stability while machining cylindrical or tapered workpieces. It reduces friction and ensures concentricity between the workpiece and the lathe spindle, enabling accurate and efficient turning operations. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBody Diameter: 23 mm\u003c\/li\u003e\n\u003cli\u003eOverall Length: 97 mm\u003c\/li\u003e\n\u003cli\u003eMorse Taper: MT1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePremium Construction\u003c\/strong\u003e: Constructed from high-grade tool steel, this revolving center ensures longevity and reliability, even under heavy usage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Machining\u003c\/strong\u003e: Engineered with precision machining, this center provides accurate rotation and alignment, essential for intricate turning and shaping tasks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth Operation\u003c\/strong\u003e: Equipped with precision double bearings, this revolving center offers smooth and consistent rotation, reducing friction and wear for optimal performance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Compatibility\u003c\/strong\u003e: Compatible with a wide range of mini lathes, this revolving center easily integrates into your existing setup, offering versatility for various projects.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Support\u003c\/strong\u003e: Designed with a pointed tip, this center provides enhanced support to your workpieces, minimizing vibration and deflection for superior results.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Simple to install and remove, this revolving center streamlines setup and ensures hassle-free operation, saving you time and effort.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-material Capabilities\u003c\/strong\u003e: Whether you're working with wood, metal, or other materials, this revolving center delivers consistent performance across a variety of applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Size\u003c\/strong\u003e: Its compact size makes it ideal for use with mini lathes, providing efficient turning capabilities without taking up excessive space in your workshop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Results\u003c\/strong\u003e: By ensuring precise alignment and rotation, this revolving center helps you achieve professional-quality results, elevating the quality of your craftsmanship.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"MT0","offer_id":50837019459885,"sku":"10-RC-105","price":21.5,"currency_code":"USD","in_stock":true},{"title":"MT1","offer_id":50837019492653,"sku":"10-RC-103","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/longtailrevolvingcenterb.jpg?v=1751010171"},{"product_id":"lathe-live-center-with-triple-bearing-high-precision-revolving","title":"Triple Bearing High Precision Live Revolving Center for Lathe Live Center","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eUse of the Product\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eA Triple Bearing Live Revolving Centre is a vital machine tool accessory used primarily in metalworking and woodworking on lathes and similar rotary machinery. Its main purpose is to support the workpiece on the non-driven end of the lathe spindle while allowing it to rotate freely, reducing deflection and vibration during machining operations. With its triple bearing design, it evenly distributes load, minimising friction and heat generation even during high-speed machining tasks. This ensures extended tool and workpiece life while maintaining precision and stability. These centres come in various configurations to accommodate different workpiece sizes. \u003c\/span\u003eDiscover unparalleled precision and reliability with our High Precision Triple Bearing Live Revolving Centre in MT2 Shank. Engineered to meet the exacting demands of modern machining, this revolving centre is a cornerstone for achieving exceptional accuracy and performance in your turning operations.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTriple Bearing Design\u003c\/strong\u003e: Equipped with three high-grade bearings (Fitted with 2 Ball bearings \u0026amp;amp; 1 Taper Bearing), this revolving centre ensures smooth rotation and minimised friction, providing enhanced stability and durability even under heavy loads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMT2 Shank\u003c\/strong\u003e: Designed with a precision MT2 shank, this centre offers universal compatibility with a wide range of lathes, guaranteeing seamless integration into your machining setup.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Precision Machining\u003c\/strong\u003e: Crafted with meticulous attention to detail, this revolving centre facilitates precise centring of the workpiece, resulting in superior machining accuracy and surface finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Construction\u003c\/strong\u003e: Built to withstand rigorous machining conditions, this centre features a rugged construction with hardened steel components, ensuring longevity and consistent performance over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Applications\u003c\/strong\u003e: Suitable for a variety of machining tasks, including turning, milling, and grinding, this revolving centre is ideal for both professional machinists and hobbyists seeking exceptional results.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Manoeuvrability\u003c\/strong\u003e: The slim design of the centre allows for improved access to the workpiece, enabling precise machining even in tight spaces while minimising interference.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Setup\u003c\/strong\u003e: With its straightforward installation process, this revolving centre can be quickly mounted onto your lathe, enabling you to commence machining operations with minimal downtime.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: (\u003cspan data-mce-fragment=\"1\"\u003e2MT SHANK- 3\/4\" X 16 UNF), \u003cspan data-mce-fragment=\"1\" class=\"a-list-item\"\u003e(3MT SHANK- 3\/4'' X 16 UNF) and \u003cspan\u003e(2MT SHANK- 1 X 8 TPI)\u003c\/span\u003e \u003c\/span\u003e- \u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003eBody Diameter 44 mm, Bearing Case Length: 52 mm, OAL: 157.5 mm.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e{Internal Reference: HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"2MT SHANK- 3\/4\" X 16 UNF","offer_id":44519979516205,"sku":"10-RC-2001","price":43.5,"currency_code":"USD","in_stock":true},{"title":"3MT SHANK- 3\/4\" X 16 UNF","offer_id":44519979483437,"sku":"10-RC-2002","price":44.99,"currency_code":"USD","in_stock":false},{"title":"2MT SHANK- 1 X 8 TPI","offer_id":49366481666349,"sku":"10-RC-2003","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/products\/a0fbfc7ac5bbba773a3d79996ba8ac06.jpg?v=1713613692"},{"product_id":"heavy-duty-live-center-with-double-bearings-and-5-micron","title":"Double Bearing Live Revolving Center Centre BORE Ground Run Out Within 5 MICRONS","description":"\u003cp\u003eA revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShank Options\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMT2 (Morse Taper 2)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMT3 (Morse Taper 3)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Sizes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eM12 x 1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eM14 x 1\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Construction\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBORE Ground Run Out\u003c\/strong\u003e: Within 5 microns, ensuring high accuracy and minimal deviation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDouble Bearing System\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e1 x Taper Radial Bearing\u003c\/li\u003e\n\u003cli\u003e1 x Ball Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stability\u003c\/strong\u003e: The double bearing design provides superior stability and load-bearing capacity, reducing vibrations and ensuring smoother operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 52 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Case Diameter\u003c\/strong\u003e: 58.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 180 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Materials\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from high-quality materials for long-lasting performance and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eBenefits:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Precision\u003c\/strong\u003e: With a ground run out within 5 microns, this live center offers exceptional accuracy for high-precision machining tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility\u003c\/strong\u003e: Available in both MT2 and MT3 shank sizes with M12 x 1 and M14 x 1 thread options to fit a wide range of lathes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStability and Smooth Operation\u003c\/strong\u003e: The combination of a taper radial bearing and a ball bearing ensures maximum stability and smooth rotation, reducing wear and extending the tool's lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Design\u003c\/strong\u003e: The durable construction and precise engineering make this live center suitable for demanding machining environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLathe Operations\u003c\/strong\u003e: Ideal for various turning applications, providing reliable support and precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetalworking\u003c\/strong\u003e: Suitable for professional machinists and hobbyists working with metal lathes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Precision Machining\u003c\/strong\u003e: Perfect for tasks requiring high accuracy and stability, such as CNC turning and complex part manufacturing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnhance your lathe operations with the Double Bearing Live Revolving Center, designed for precision, stability, and durability, meeting the needs of both professional machinists and hobbyists.\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"(2MT-M12 x 1)","offer_id":44519979778349,"sku":"10-RC-901","price":29.9,"currency_code":"USD","in_stock":false},{"title":"(2MT-M14 x 1)","offer_id":44519979811117,"sku":"10-RC-902","price":29.9,"currency_code":"USD","in_stock":false},{"title":"(3MT-M12 x 1)","offer_id":44519979843885,"sku":"10-RC-903","price":29.9,"currency_code":"USD","in_stock":false},{"title":"(3MT-M14 x 1)","offer_id":44519979876653,"sku":"10-RC-904","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/products\/15_886fb994-68de-4dbc-bc40-e64f21bf32ce.jpg?v=1719314867"},{"product_id":"cnc-live-centre-double-bearings-run-out-under-5-microns","title":"CNC Live Centre Double Bearings Live Revolving Center Standard Nose Run out under 5 microns","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eUse of product:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDouble Bearings Live Revolving Center Standard Nose-Run-out under 5 microns - Live Revolving Center Centre Body is made from Alloy steel grade of EN8D and EN31 is used for Quill\/ Point Center Used quality Z type bearing (covered), so that the grease inside when melt at high temperature during working will remain locked and sealed. The body ID(s)\/ bearing casing of the Revolving Centers are internally grounded who only provide machined ID(s). This grinded inside body gives best control on the run out after bearing and quill fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed For\u003c\/strong\u003e:- \u003cspan\u003e It allows higher turning speeds without the need for separate lubrication, and also greater clamping pressures. CNC Lathes \u003c\/span\u003e\u003cspan\u003euse this type of center almost exclusively and they may be used for general machining operations as well\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Quality\u003c\/strong\u003e: Precision-engineered revolving center designed for smooth and accurate rotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Design\u003c\/strong\u003e: Compatible with a wide range of lathes, suitable for various woodworking and metalworking projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Made from alloy steel to ensure long-lasting performance and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Rotation\u003c\/strong\u003e: Features precision bearings for effortless spinning and reduced friction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stability\u003c\/strong\u003e: Sturdy construction and secure mounting ensure stable operation even under heavy loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Simple setup process allows for quick integration with your existing lathe system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Results\u003c\/strong\u003e: Achieve professional-level precision and consistency in your turning projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted Brand\u003c\/strong\u003e: By Buyohlic International's reputation for excellence in engineering and craftsmanship.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatisfaction Guaranteed\u003c\/strong\u003e: Purchase with confidence thanks to our commitment to customer satisfaction and support.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buyohlic International","offers":[{"title":"(MT2)","offer_id":44519979942189,"sku":"10-RC-1101","price":35.5,"currency_code":"USD","in_stock":true},{"title":"(MT3)","offer_id":44519979974957,"sku":"10-RC-1102","price":32.5,"currency_code":"USD","in_stock":true},{"title":"SET OF BOTH","offer_id":44519980007725,"sku":"10-RC-1103","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/products\/2b8c5e20bbfa4bd15e84a9fd816d4316.jpg?v=1676807557"},{"product_id":"double-bearing-live-center-lathe-precision-revolving-center","title":"Double Bearing Live Center Lathe Revolving Precision Center for Engineering \u0026 Lathe Machines","description":"\u003cp\u003e\u003cstrong\u003eUse of product:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA  revolving center, also known as a live center, is a tool used in machining and metalworking. It supports the end of a workpiece on a lathe or similar machine, allowing it to rotate smoothly with minimal friction. This helps to stabilize the workpiece and ensures accurate machining operations like turning, drilling, or grinding.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShank Options\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2 MT (Morse Taper 2)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3 MT (Morse Taper 3)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Sizes\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eM12 x 1\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eM14 x 1\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDouble Bearing System\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e1 x Taper Radial Bearing\u003c\/li\u003e\n\u003cli\u003e1 x Ball Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stability\u003c\/strong\u003e: Ensures maximum stability, reducing vibrations and providing smoother operation.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Construction\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from high-quality tool Steel for long-lasting performance and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eBenefits:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Accuracy\u003c\/strong\u003e: The ground run out within 5 microns ensures high accuracy for precision machining tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility\u003c\/strong\u003e: Available in 2 MT and 3 MT shank sizes with M12 x 1 and M14 x 1 thread options, making it suitable for a wide range of conventional lathe machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Operation\u003c\/strong\u003e: The double bearing design, featuring both a taper radial bearing and a ball bearing, provides superior stability and smooth rotation, reducing wear and extending the tool's lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Design\u003c\/strong\u003e: Built to withstand demanding machining environments, ensuring reliable performance over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLathe Operations\u003c\/strong\u003e: Ideal for various turning applications on conventional lathe machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetalworking\u003c\/strong\u003e: Suitable for professional machinists and hobbyists working with metal lathes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Precision Machining\u003c\/strong\u003e: Perfect for tasks requiring high accuracy and stability, such as precision turning and complex part manufacturing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnhance your turning operations with the Double Bearing Live Revolving Center for conventional lathe machines, offering precision, stability, and versatility for a wide range of applications.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"(2MT- M12 X 1)","offer_id":44519980073261,"sku":"10-RC-1001","price":39.5,"currency_code":"USD","in_stock":true},{"title":"(2MT- M14 X 1)","offer_id":44519980106029,"sku":"10-RC-1002","price":39.5,"currency_code":"USD","in_stock":true},{"title":"(3MT- M12 X 1)","offer_id":44519980138797,"sku":"10-RC-1003","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/taper_mount_a.jpg?v=1752737210"},{"product_id":"mini-lathe-triple-bearing-precision-live-center-high-accuracy","title":"Mini Lathe Precision Live Center with Double Bearings High Accuracy Revolving Center","description":"\u003cp\u003e\u003cspan\u003eA Revolving center provides support for the workpiece during rotation on the lathe spindle. In a mini lathe, which is smaller and often used for hobbyist or small-scale machining projects, the revolving center helps maintain precision and stability while machining cylindrical or tapered workpieces. It reduces friction and ensures concentricity between the workpiece and the lathe spindle, enabling accurate and efficient turning operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePremium Construction\u003c\/strong\u003e: Constructed from high-grade tool steel, this revolving center ensures longevity and reliability, even under heavy usage. Diameter 23 mm. OAL Mt0:- 65 mm, OAL MT1:- 67.5 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Machining\u003c\/strong\u003e: Engineered with precision machining, this center provides accurate rotation and alignment, essential for intricate turning and shaping tasks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth Operation\u003c\/strong\u003e: Equipped with precision double bearings, this revolving center offers smooth and consistent rotation, reducing friction and wear for optimal performance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Compatibility\u003c\/strong\u003e: Compatible with a wide range of mini lathes, this revolving center easily integrates into your existing setup, offering versatility for various projects.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Support\u003c\/strong\u003e: Designed with a pointed tip, this center provides enhanced support to your workpieces, minimizing vibration and deflection for superior results.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Simple to install and remove, this revolving center streamlines setup and ensures hassle-free operation, saving you time and effort.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-material Capabilities\u003c\/strong\u003e: Whether you're working with wood, metal, or other materials, this revolving center delivers consistent performance across a variety of applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Size\u003c\/strong\u003e: Its compact size makes it ideal for use with mini lathes, providing efficient turning capabilities without taking up excessive space in your workshop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Results\u003c\/strong\u003e: By ensuring precise alignment and rotation, this revolving center helps you achieve professional-quality results, elevating the quality of your craftsmanship.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTools Specification ;-\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMT0 Shank\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eSmall Body 23 mm Diameter Double Bearing Live Revolving Center.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eshort MT0 Shank, OAL 65 mm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eTool Steel Housing and hardened point. Run out within 0.001\" Suited for small woodworking lathes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"a-list-item\"\u003eMT1 Shank\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eSmall Body 23 mm Diameter Double Bearing Live Revolving Center\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eMT1 Shank, OAL 67.50 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eTool Steel Housing and hardened point. Run out within 0.001\"\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOverall, the mini lathe revolving center combines precision engineering with robust construction to provide reliable support and enhanced machining capabilities for mini lathe users. Whether for intricate woodturning projects or precision metalworking tasks, this accessory is a valuable addition to any mini lathe setup.\u003c\/p\u003e\n\u003cp\u003e{Internal Reference: HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"MT0","offer_id":48758349234477,"sku":"10-RC-101","price":14.95,"currency_code":"USD","in_stock":false},{"title":"MT1","offer_id":48758349267245,"sku":"10-RC-102","price":15.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/mt0.jpg?v=1722920544"},{"product_id":"mt4-triple-bearing-lathe-revolving-centre-under-5-microns","title":"Precision MT4 Triple Bearing Lathe Revolving Centre For Metalworking – Under 5 Microns Runout","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eTool Specification:\u003c\/strong\u003e Has 2 Ball Bearings \u0026amp; 1 Taper Bearing. Body Diameter: 63 mm, Bearing Body Case Length: 70 mm, OAL 240 mm , Shank MT4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed for: \u003c\/strong\u003eIt allows higher turning speeds without the need for separate lubrication, and also greater clamping pressures. CNC lathes use this type of center almost exclusively and they may be used for general machining operations as well.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Machining:\u003c\/strong\u003e Crafted for high-precision machining applications, this CNC revolving center ensures exceptional accuracy and repeatability in every operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed to seamlessly integrate with CNC lathes, milling machines, and other machining centers, offering versatility across various machining setups.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Built with \u003cspan\u003eAlloy steel grade of EN8D and EN31 is used for Quill\/ Point Center\u003c\/span\u003e, to withstand the rigors of heavy-duty machining processes, ensuring long-term reliability and performance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Stability:\u003c\/strong\u003e Features a robust bearing system and precision-engineered components to provide superior stability during high-speed machining, minimizing vibrations and ensuring consistent results.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Design:\u003c\/strong\u003e Equipped with adjustable components, such as interchangeable tips and tailstocks, allowing for customization to suit specific machining requirements and workpiece geometries.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEfficient Lubrication System:\u003c\/strong\u003e Incorporates an efficient lubrication system to ensure smooth operation and prolong the lifespan of critical components, reducing maintenance downtime and enhancing productivity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation and Setup:\u003c\/strong\u003e Designed for straightforward installation and setup, with intuitive adjustment mechanisms and clear instructions, enabling quick integration into existing machining setups.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range of Applications:\u003c\/strong\u003e Suitable for a wide range of machining applications, including turning, drilling, and milling, across various industries such as automotive, aerospace, and manufacturing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise Performance Monitoring:\u003c\/strong\u003e Compatible with advanced monitoring and control systems, allowing for real-time performance monitoring and optimization, enhancing efficiency and quality control.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eComprehensive Support:\u003c\/strong\u003e Backed by comprehensive customer support and after-sales service, including technical assistance, maintenance, and spare parts availability, ensuring peace of mind and maximum uptime.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance:\u003c\/strong\u003e Manufactured to stringent quality standards and subjected to rigorous testing procedures to ensure superior quality, reliability, and performance, meeting the demands of modern machining environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e{Internal Reference: HM}\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buyohlic International","offers":[{"title":"Default Title","offer_id":44519983612205,"sku":"10-RC-2501","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/products\/a11db0858d9652f4bc25f7acdb903096.jpg?v=1676807682"},{"product_id":"bull-nose-live-center-pipe-type-revolving-center-for-lathe-tool","title":"Bull Nose Live Center Pipe Type Revolving Center for Lathe Machine","description":"\u003cp\u003e\u003cspan\u003eA revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bull Nose Pipe Live Revolving Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality tool steel grade 8620\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Treatment:\u003c\/strong\u003e Hardness up to 58+\/- 2 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Ground:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Setup:\u003c\/strong\u003e Double bearing setup, including ball and taper bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Holding Diameter Capacity:\u003c\/strong\u003e 2\" (50 mm) to 3\" (75 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e Available in MT2 and MT3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Construction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from high-quality tool steel grade 8620 for enhanced durability and strength.\u003c\/li\u003e\n\u003cli\u003eHeat treated for hardness up to 58+\/- 2 HRC, ensuring long-lasting performance and resistance to wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision and Accuracy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision ground for superior accuracy and smooth operation.\u003c\/li\u003e\n\u003cli\u003eThe head revolves on a double bearing setup, which includes both ball and taper bearings, providing stable and reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Usage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for spinning large diameters of pipe or hollow workpieces.\u003c\/li\u003e\n\u003cli\u003eSuitable for a wide range of lathe operations involving pipes and hollow materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePipe Capacity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCapable of holding pipe diameters from 2\" (50 mm) to 3\" (75 mm), accommodating various pipe sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShank Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in both MT2 and MT3 shank sizes, offering compatibility with different lathe machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"Morse Taper 2MT","offer_id":44519984791853,"sku":"10-RC-1701","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Morse Taper 3MT","offer_id":44519984824621,"sku":"10-RC-1702","price":43.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/bluntnose.jpg?v=1773059097"},{"product_id":"double-bearing-lathe-machine-center-revolving-long-tip","title":"Double Bearing Lathe Machine Center Pipe Cum Revolving Center (Long Tip) for Metalworking","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUse of product\u003c\/strong\u003e- A revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Double Bearing Lathe Pipe Cum Revolving Center (Long Tip)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1 Ball Bearing\u003c\/li\u003e\n\u003cli\u003e1 Taper Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Body Case Length:\u003c\/strong\u003e 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL):\u003c\/strong\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e Available in MT2 and MT3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRunout:\u003c\/strong\u003e Under 5 microns (recommended for conventional lathes only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Alloy steel grade EN8D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill\/Point Center Material:\u003c\/strong\u003e EN31 steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Design:\u003c\/strong\u003e Allows use as both a revolving\/live center and a pipe center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Capacity for Turning:\u003c\/strong\u003e 12 to 28 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision and High Quality:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with precision double bearings for enhanced accuracy and performance.\u003c\/li\u003e\n\u003cli\u003eMaintains a runout of under 5 microns, making it ideal for conventional lathes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial and Construction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from high-strength alloy steel grade EN8D for the body.\u003c\/li\u003e\n\u003cli\u003eThe quill\/point center is made from EN31 steel, ensuring high wear resistance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Usage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique nose design allows it to function as both a revolving\/live center and a pipe center.\u003c\/li\u003e\n\u003cli\u003eSuitable for turning pipes with a diameter range of 12 to 28 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBearing Quality:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizes Z type (covered) bearings.\u003c\/li\u003e\n\u003cli\u003eDesigned to lock and seal grease inside, even when melted at high temperatures during operation, ensuring consistent performance and extended life span.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"Morse Taper 2","offer_id":49612685541677,"sku":"10-RC-1401","price":35.9,"currency_code":"USD","in_stock":true},{"title":"Morse Taper 3","offer_id":49612685574445,"sku":"10-RC-1402","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/products\/e1d9f52ffcfb7030bf28153427cc66c7.jpg?v=1676807746"},{"product_id":"precision-metal-lathe-live-center-for-conventional-lathes","title":"Precision Live Revolving Metal Lathe Live Center for Conventional Lathes","description":"\u003cp\u003eA revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eGeneral Description :-\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of quality tool steel with hardened point. Shanks are precisely ground to match a concentric run out of +\/-0.01 mm\u003c\/li\u003e\n\u003cli\u003eHigh quality ball bearings \u0026amp; taper bearing combination absorbs both radial \u0026amp; thrusts load to guarantee smooth movement\u003c\/li\u003e\n\u003cli\u003eWell suited for conventional lathe machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMorse Taper MT1 :\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBearing Body Diameter : 42 mm\u003c\/li\u003e\n\u003cli\u003eBearing Case Body Length : 41 mm\u003c\/li\u003e\n\u003cli\u003eOAL :125 mm\u003c\/li\u003e\n\u003cli\u003eNumber of bearings : 1 x Ball \u0026amp; 1 x Taper Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eMorse Taper MT2 :\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBearing Body Diameter : 44 mm\u003c\/li\u003e\n\u003cli\u003eBearing Case Body Length : 46 mm\u003c\/li\u003e\n\u003cli\u003eOAL :140 mm\u003c\/li\u003e\n\u003cli\u003eNumber of bearings : 1 x Ball \u0026amp; 1 x Taper Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eMorse Taper MT3 :\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBearing Body Diameter : 60 mm\u003c\/li\u003e\n\u003cli\u003eBearing Case Body Length : 60 mm\u003c\/li\u003e\n\u003cli\u003eOAL :180 mm\u003c\/li\u003e\n\u003cli\u003eNumber of bearings : 2 x Ball \u0026amp; 1 x Taper Bearing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BUYOHLIC INTERNATIONAL","offers":[{"title":"Shank MT1","offer_id":44519988920621,"sku":"10-RC-701","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Shank MT2","offer_id":44519988953389,"sku":"10-RC-702","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Shank MT3","offer_id":44519988986157,"sku":"10-RC-703","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/e151fa82398c7bb409ed47acca4df1c4.jpg?v=1739015479"},{"product_id":"precision-10-micron-live-revolving-lathe-tailstock-center","title":"Precision Runout Under 10 Micron Multi Point Bullet Live Revolving Center for Lathe Tailstock Center","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUse of product\u003c\/strong\u003e-A multipoint revolving center, commonly known as a live center, serves as a vital component in machine tool applications, particularly within lathe operations. Mounted in the tailstock, it supports workpieces at the non-driven end, reducing deflection and vibration during machining, thereby enhancing surface finish and dimensional accuracy. By evenly distributing load and minimizing friction, it facilitates smooth rotation of the workpiece, crucial for turning, facing, drilling, and other lathe operations. Its interchangeable tips accommodate various workpiece shapes and sizes, ensuring proper centering and support, thus improving machining efficiency and accuracy. Overall, the multipoint revolving center plays a pivotal role in enhancing the quality and productivity of machining processes.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-Point Design\u003c\/strong\u003e: Experience superior stability and support with our multipoint revolving center. Equipped with multiple precision-ground points, it ensures even distribution of force and minimizes deflection, resulting in smoother cuts and finer finishes on your workpieces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Functionality\u003c\/strong\u003e: From light-duty turning to heavy-duty machining, our revolving center adapts to a wide range of applications with ease. Whether you're working with wood, metal, or composite materials, enjoy the versatility and flexibility offered by our multipoint design.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Machining\u003c\/strong\u003e: Achieve unparalleled accuracy and consistency in your lathe operations. Each component of our revolving center is precision-machined to tight tolerances, ensuring reliable performance and exceptional results with every use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Built to withstand the rigors of continuous use, our revolving center is constructed from high-quality tool steel for maximum durability and longevity. The rugged housing and hardened steel points deliver unmatched strength and resilience, making it ideal for demanding machining tasks. T\u003cspan\u003ehis set is supplied in a plastic suitcase as advertised, and comes with 7 different tips- 5 x live centers, 1 x female center, 1 x pipe center tip with an ejecting key\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Designed for hassle-free setup and operation, our revolving center features a user-friendly design that allows for quick and easy installation on your lathe. Simply secure it in place and enjoy seamless integration into your existing workflow.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth Revolving Action\u003c\/strong\u003e: Experience smooth and precise rotation with our revolving center, thanks to its high-quality bearings and efficient design. Whether you're turning cylindrical, conical, or irregular-shaped workpieces, enjoy consistent performance and effortless operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Productivity\u003c\/strong\u003e: Boost your productivity and efficiency with the reliability and precision of our multipoint revolving center. Spend less time on setup and adjustments, and more time on actual machining, allowing you to complete projects faster and with greater accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e{Internal Reference: HM}\u003c\/p\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"Morse Taper 2","offer_id":44519992361261,"sku":"10-RC-2302","price":58.5,"currency_code":"USD","in_stock":false},{"title":"Morse Taper 3","offer_id":44519992394029,"sku":"10-RC-2303","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/mt2_B.jpg?v=1721218154"},{"product_id":"mt2-revolving-centre-small-slim-triple-bearing-live-center","title":"Small Slim Long Body MT2 Revolving Centre – Triple Bearing Live Revolving Center for Lathe Machine","description":"\u003cp data-mce-fragment=\"1\"\u003eIntroducing our Small Slim Long Body Triple Bearing Live Revolving Center - MT2, engineered to precision for enhanced performance in your machining tasks. Crafted with high-grade materials and featuring cutting-edge triple-bearing technology, this revolving center ensures smooth rotation and unparalleled stability during operation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey Features:\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTriple Bearing Design\u003c\/strong\u003e: Equipped with three precision bearings, this revolving center offers exceptional load-bearing capacity and reduced friction, resulting in smoother rotation and extended tool life.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMT2 Shank\u003c\/strong\u003e: Designed with a MT2 shank, this live center is compatible with a wide range of lathes, ensuring versatility and ease of use across various machining applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSlim Long Body\u003c\/strong\u003e: The slim and elongated body design provides improved access to the workpiece, allowing for precise machining even in tight spaces. This design also minimizes interference and enhances maneuverability. \u003cspan class=\"a-list-item\"\u003eBody Diameter is 32 mm. Overall Length is 130 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHigh-Quality Construction\u003c\/strong\u003e: Constructed from premium materials, including hardened steel components, this revolving center is built to withstand heavy-duty use and maintain consistent performance over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVersatile Applications\u003c\/strong\u003e: Suitable for a variety of turning, milling, and grinding applications, this live revolving center is ideal for both professional machinists and hobbyists alike.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrecision Machining\u003c\/strong\u003e: Engineered with meticulous attention to detail, this center ensures accurate centering of the workpiece, resulting in superior machining accuracy and surface finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/strong\u003e: Designed for hassle-free setup, this revolving center can be quickly installed and secured onto your lathe, allowing you to start machining with minimal downtime.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhether you're working on intricate woodturning projects or precision metal machining tasks, our Small Slim Long Body Triple Bearing Live Revolving Center - MT2 is the perfect companion for achieving exceptional results with ease and efficiency. Invest in quality, precision, and reliability for your machining needs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e{Internal Reference; HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"Default Title","offer_id":48758287696173,"sku":"10-RC-201","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/1_a40250d3-ec09-4415-bb6e-748a283470db.jpg?v=1713611301"},{"product_id":"mt2-live-centre-revolving-center-with-threaded-nose-for-lathe","title":"Lathe MT2 Live Centre Revolving Center with Threaded Nose – Precision Turning Tool","description":"\u003cdiv data-mce-fragment=\"1\" class=\"flex-1 overflow-hidden\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"react-scroll-to-bottom--css-rebbp-79elbk h-full\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"react-scroll-to-bottom--css-rebbp-1n7m0yu\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"flex flex-col text-sm pb-9\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"w-full text-token-text-primary\" dir=\"auto\" data-testid=\"conversation-turn-15\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"px-4 py-2 justify-center text-base md:gap-6 m-auto\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"flex flex-1 text-base mx-auto gap-3 juice:gap-4 juice:md:gap-6 md:px-5 lg:px-1 xl:px-5 md:max-w-3xl lg:max-w-[40rem] xl:max-w-[48rem]\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"relative flex w-full flex-col agent-turn\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"flex-col gap-1 md:gap-3\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"flex flex-grow flex-col max-w-full\"\u003e\n\u003cdiv data-mce-fragment=\"1\" data-message-author-role=\"assistant\" data-message-id=\"37cb6c85-6f58-4e25-ba6b-2ce34ccf366e\" dir=\"auto\" class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLathe Triple Bearing Live Revolving Center Centre with MT2 Shank and Square Tool Bit Broach, now available with Myford and Boxford thread compatibility. Engineered to redefine precision and performance in machining, this cutting-edge revolving center is designed to exceed your expectations.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey Features:\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTriple Bearing Design\u003c\/strong\u003e: Experience unparalleled stability and smooth rotation with our triple-bearing design. This advanced feature minimizes friction, enhances load-bearing capacity, and ensures consistent performance under heavy machining conditions. \u003cspan class=\"a-list-item\"\u003e2 Taper \u0026amp; 1 Radial Bearing in Body with a thread Nose 1-1\/8\" x 12 TPI instead of a Point Centre.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMT2 Shank\u003c\/strong\u003e: Equipped with a durable MT2 shank, this live revolving center guarantees compatibility with a wide range of lathe models, providing a secure and reliable connection for seamless machining operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSquare Tool Bit Broach\u003c\/strong\u003e: Enhance your machining versatility with the included square tool bit broach. Whether you're facing, turning, or contouring, this feature allows for precise cutting and shaping of various materials with ease.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMyford and Boxford Thread Compatibility\u003c\/strong\u003e: With threads tailored for Myford (1-1\/8\" x 12 TPI) and Boxford (1-1\/2\" X 8TPI) lathes, this revolving center offers universal compatibility, ensuring a perfect fit and hassle-free integration with these popular lathe models. \u003cspan class=\"a-list-item\"\u003eBody Diameter 44.5 mm. \u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003eBody Length (Bearing Hosing) : 51.0 mm OAL (Overall Body Length) : 160 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrecision Engineering\u003c\/strong\u003e: Meticulously crafted for accuracy, this live center facilitates precise centering of workpieces, resulting in superior machining quality, finer finishes, and reduced setup time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDurable Construction\u003c\/strong\u003e: Built to withstand the demands of professional machining environments, this revolving center boasts a rugged construction and high-quality materials, guaranteeing long-lasting durability and reliability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy Installation and Operation\u003c\/strong\u003e: Designed for user convenience, this center can be effortlessly installed onto your lathe, allowing you to focus on your machining tasks without unnecessary delays or complications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVersatile Applications\u003c\/strong\u003e: From turning and threading to grooving and parting, this live revolving center is suitable for a wide range of machining applications, catering to the diverse needs of machinists, artisans, and hobbyists.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUpgrade your lathe setup with the New Lathe Triple Bearing Live Revolving Center Centre MT2 Shank with Square Tool Bit Broach, and elevate your machining capabilities to new heights. Experience precision, reliability, and versatility like never before.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e{Internal Reference; HM}\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Buyohlic International","offers":[{"title":"Boxford Thread (1-1\/2\" X 8TPI)","offer_id":48758350348589,"sku":"10-RC-2101","price":44.99,"currency_code":"USD","in_stock":false},{"title":"Myford Thread (1-1\/8\" x 12 TPI)","offer_id":48758350315821,"sku":"10-RC-2102","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/boxford.jpg?v=1713618174"},{"product_id":"precision-mt4-live-center-cnc-lathe-with-long-spindle-tips","title":"MT4 Live Center for CNC Lathe | Long Spindle, Interchangeable Tips","description":"\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUltra-Precision Machining\u003c\/strong\u003e: Achieve unparalleled accuracy with our new CNC Long Spindle Live Revolving Center MT4, boasting under 10 microns runout for meticulous results.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInterchangeable Tips\u003c\/strong\u003e: Versatility meets precision with interchangeable tips designed to handle a wide range of machining tasks, enhancing flexibility and efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eReliable Performance\u003c\/strong\u003e: Engineered for consistent and reliable performance, this revolving center ensures dependable results with every operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEnhanced Productivity\u003c\/strong\u003e: From intricate designs to complex turning tasks, this CNC center empowers you to tackle various applications with ease, boosting productivity in your workshop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy Setup\u003c\/strong\u003e: Designed for hassle-free installation, this CNC center is user-friendly, allowing you to start machining right out of the box.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRobust Construction\u003c\/strong\u003e: Built to withstand rigorous machining operations, our revolving center features a durable construction for long-lasting performance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProfessional Grade\u003c\/strong\u003e: Whether you're a seasoned professional or a hobbyist, our CNC Long Spindle Live Revolving Center MT4 delivers professional-grade precision for all your machining needs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-mce-fragment=\"1\"\u003eElevate your machining capabilities with the precision and versatility of our CNC Long Spindle Live Revolving Center MT4, and experience the difference in your projects.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e[Internal Reference: HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"Default Title","offer_id":48766248976685,"sku":"10-RC-2502","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/1_81f94d48-fccf-4319-a046-f6adaaaf7356.jpg?v=1713771390"},{"product_id":"precision-live-center-slim-triple-bearing-10-micron-accuracy","title":"Precision Live Center Small Slim Body Triple Bearing Revolving Live Center Under 10 Micron Run Out, 1500 1800 RPM","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUse of product\u003c\/strong\u003e- Introducing our Small Slim Long Body Triple Bearing Live Revolving Center - MT2, engineered to precision for enhanced performance in your machining tasks. Crafted with high-grade materials and featuring cutting-edge triple-bearing technology, this revolving center ensures smooth rotation and unparalleled stability during operation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey Features:\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUsed for: \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA live center or revolving center is constructed so that the 60° center runs in its own bearings and is used at the non-driven or tailstock end of a machine. It allows higher turning speeds without the need for separate lubrication, and also greater clamping pressures.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTriple Bearing Design\u003c\/strong\u003e: Equipped with three precision bearings, this revolving center offers exceptional load-bearing capacity and reduced friction, resulting in smoother rotation and extended tool life.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMT2 Shank\u003c\/strong\u003e: Designed with a MT2 shank, this live center is compatible with a wide range of lathes, ensuring versatility and ease of use across various machining applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSlim Long Body\u003c\/strong\u003e: The slim and elongated body design provides improved access to the workpiece, allowing for precise machining even in tight spaces. This design also minimizes interference and enhances maneuverability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHigh-Quality Construction\u003c\/strong\u003e: Constructed from premium materials, including hardened steel components, this revolving center is built to withstand heavy-duty use and maintain consistent performance over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVersatile Applications\u003c\/strong\u003e: Suitable for a variety of turning, milling, and grinding applications, this live revolving center is ideal for both professional machinists and hobbyists alike.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePrecision Machining\u003c\/strong\u003e: Engineered with meticulous attention to detail, this center ensures accurate centering of the workpiece, resulting in superior machining accuracy and surface finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/strong\u003e: Designed for hassle-free setup, this revolving center can be quickly installed and secured onto your lathe, allowing you to start machining with minimal downtime.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhether you're working on intricate woodturning projects or precision metal machining tasks, our Small Slim Long Body Triple Bearing Live Revolving Center - MT2 is the perfect companion for achieving exceptional results with ease and efficiency. Invest in quality, precision, and reliability for your machining needs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e{Internal Reference; HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"Morse Taper 2","offer_id":48859531706669,"sku":"10-RC-301","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Morse Taper 3","offer_id":48859531739437,"sku":"10-RC-302","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/1_ab577048-c1d4-4fa0-a32c-0861db575a3b.jpg?v=1714558466"},{"product_id":"precision-double-bearings-revolving-center-0-01-mm-runout","title":"Precision Double Bearings Live Revolving Center – Runout Under 0.01 mm Thread Type","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed for: \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA live center or revolving center is constructed so that the 60° center runs in its own bearings and is used at the non-driven or tailstock end of a machine. It allows higher turning speeds without the need for separate lubrication, and also greater clamping pressures.\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eTool Specifications: \u003c\/strong\u003eMT2 Shank with M12 X 1 \u0026amp; M14 x 1 thread for mounting chuck or any drill chuck of this thread. Best \u003cspan\u003efor Metal Working \u0026amp; Wood Working Jobs-Guaranteed Run out within 0.01 mm.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSuperior Machining Precision:\u003c\/strong\u003e Designed to deliver exceptional machining precision, this lathe tailstock revolving center ensures accurate rotation and support for workpieces during turning operations, resulting in superior surface finishes and dimensional accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTailstock Integration:\u003c\/strong\u003e Seamlessly integrates with lathe tailstocks, providing additional support to workpieces and reducing deflection during machining, ultimately enhancing machining quality and efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Constructed from high-quality materials, including hardened steel and precision bearings, ensuring durability and long-lasting performance under demanding machining conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Stability:\u003c\/strong\u003e Features a robust bearing system and rigid construction to minimize vibrations and deflection, providing stable support for workpieces even at high machining speeds, thereby improving machining consistency and reducing cycle times.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Design:\u003c\/strong\u003e Offers adjustable components such as interchangeable tips and tailstock bodies, allowing for customization to accommodate various workpiece geometries and machining requirements, ensuring versatility and adaptability across different applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEfficient Lubrication System:\u003c\/strong\u003e Incorporates an efficient lubrication system to ensure smooth rotation and reduce friction, extending the lifespan of critical components and minimizing maintenance requirements, thus maximizing uptime and productivity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and Easy Setup:\u003c\/strong\u003e Designed for easy installation and setup, with user-friendly adjustment mechanisms and clear instructions, enabling operators to integrate the revolving center into lathe setups quickly and efficiently, minimizing downtime and improving workflow efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range of Applications:\u003c\/strong\u003e Suitable for a variety of machining applications, including turning, facing, drilling, and taper turning, across diverse industries such as automotive, aerospace, and general manufacturing, making it a versatile tool for modern machining operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eReal-time Performance Monitoring:\u003c\/strong\u003e Compatible with advanced monitoring and control systems, allowing for real-time monitoring of machining parameters such as speed, temperature, and load, enabling operators to optimize machining processes for enhanced efficiency and quality control.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eComprehensive Support:\u003c\/strong\u003e Backed by comprehensive customer support and after-sales service, including technical assistance, maintenance, and spare parts availability, ensuring peace of mind and maximum uptime for machining operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance:\u003c\/strong\u003e Manufactured to stringent quality standards and subjected to rigorous testing procedures to ensure superior quality, reliability, and performance, meeting the exacting demands of precision machining environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e{Internal Reference: HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"M14 X 1 - Morse Taper 2","offer_id":48864453099821,"sku":"10-RC-801","price":31.99,"currency_code":"USD","in_stock":true},{"title":"M14 X 1 - Morse Taper 3","offer_id":48864453132589,"sku":"10-RC-802","price":32.5,"currency_code":"USD","in_stock":true},{"title":"M12 X 1 - Morse Taper 2","offer_id":50386733007149,"sku":"10-RC-803","price":31.99,"currency_code":"USD","in_stock":false},{"title":"M12 X 1 - Morse Taper 3","offer_id":50386733039917,"sku":"10-RC-804","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/mt2ritshm14x1.jpg?v=1714634843"},{"product_id":"high-precision-er-collet-live-center-for-lathe-machine-tools","title":"Precision ER Collet Revolving Live Center for Lathe Machine Tools","description":"\u003cul\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eTool Specification\u003c\/strong\u003e: Body diameter is 44 mm. Bearing body length 50 mm. Overall Length is 145 mm. Shank is hardened and precisely ground.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed For\u003c\/strong\u003e: \u003cspan\u003e A revolving center tailstock, also known as a live center, is a crucial component in a lathe that supports and rotates the workpiece. It consists of a bearing-mounted center with a point that rotates with the workpiece, reducing friction and heat during turning operations. The revolving center tailstock is typically used for cylindrical workpieces and is driven by the rotation of the lathe spindle. This setup allows for smoother and more precise turning of the workpiece, especially when working with materials that require high precision and smooth finishes.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Precision Machining:\u003c\/strong\u003e Engineered for precision machining applications, this ER collet revolving center ensures superior accuracy and repeatability, delivering high-quality machined components with tight tolerances.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eER Collet System:\u003c\/strong\u003e Utilizes the popular ER collet system, providing a versatile and secure gripping mechanism for workpieces of various diameters, offering flexibility and efficiency in machining setups.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range of Collet Sizes:\u003c\/strong\u003e Compatible with a wide range of ER collet sizes, allowing for the accommodation of different workpiece diameters, ensuring versatility and adaptability to diverse machining requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Tool Changes:\u003c\/strong\u003e Facilitates quick and tool changes, thanks to the ER collet system's fast clamping and releasing mechanism, reducing downtime and improving productivity in machining operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Constructed from high-quality materials, including hardened steel and precision bearings, ensuring durability and long-lasting performance even under demanding machining conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Stability:\u003c\/strong\u003e Features a robust bearing system and rigid construction to minimize vibration and deflection, providing stable support for workpieces during machining, resulting in improved surface finishes and dimensional accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Design:\u003c\/strong\u003e Offers adjustable components such as interchangeable collets and tailstocks, allowing for customization to accommodate various workpiece geometries and machining requirements, enhancing versatility and workflow efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEfficient Lubrication System:\u003c\/strong\u003e Incorporates an efficient lubrication system to ensure smooth rotation and reduce friction, extending the lifespan of critical components and minimizing maintenance requirements, thereby maximizing uptime and productivity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation and Setup:\u003c\/strong\u003e Designed for easy installation and setup, with user-friendly adjustment mechanisms and clear instructions, enabling operators to integrate the revolving center into machining setups quickly and efficiently, minimizing downtime and improving workflow efficiency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWide Range of Applications:\u003c\/strong\u003e Suitable for a variety of machining applications, including turning, milling, drilling, and grinding, across diverse industries such as automotive, aerospace, and medical device manufacturing, making it a versatile tool for modern machining operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eComprehensive Support:\u003c\/strong\u003e Backed by comprehensive customer support and after-sales service, including technical assistance, maintenance, and spare parts availability, ensuring peace of mind and maximum uptime for machining operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Assurance:\u003c\/strong\u003e Manufactured to stringent quality standards and subjected to rigorous testing procedures to ensure superior quality, reliability, and performance, meeting the exacting demands of precision machining environment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e{Internal Reference: HM}\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"MT2 Shank ER11","offer_id":48864799949101,"sku":"10-RC-1501","price":47.9,"currency_code":"USD","in_stock":true},{"title":"MT2 Shank ER16","offer_id":48864799981869,"sku":"10-RC-1502","price":47.9,"currency_code":"USD","in_stock":true},{"title":"MT2 Shank ER20","offer_id":48864800014637,"sku":"10-RC-1503","price":47.99,"currency_code":"USD","in_stock":true},{"title":"MT2 Shank ER25","offer_id":48864800047405,"sku":"10-RC-1504","price":47.99,"currency_code":"USD","in_stock":true},{"title":"MT3 Shank ER11","offer_id":49622894969133,"sku":"10-RC-1505","price":49.99,"currency_code":"USD","in_stock":true},{"title":"MT3 Shank ER16","offer_id":49622895001901,"sku":"10-RC-1506","price":49.99,"currency_code":"USD","in_stock":true},{"title":"MT3 Shank ER20","offer_id":49622895034669,"sku":"10-RC-1507","price":49.95,"currency_code":"USD","in_stock":true},{"title":"MT3 Shank ER25","offer_id":49622895067437,"sku":"10-RC-1508","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/mt3er25.jpg?v=1714649838"},{"product_id":"buyohlic-small-body-2mt-live-centre-jt2-taper-mount","title":"BUYOHLIC Small Body 2MT Live Centre Revolving Center with JT2 Taper Mounting","description":"\u003cp\u003eA revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type\u003c\/strong\u003e: JT2 Taper Mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailstock Taper\u003c\/strong\u003e: 2MT (Morse Taper)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Case Length\u003c\/strong\u003e: 24 mm, tailored to accommodate Myford lathe specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: High-quality materials for durability and precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Design\u003c\/strong\u003e: Small body for better clearance and ease of use in tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBenefits:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Alignment\u003c\/strong\u003e: The JT2 taper mounting provides a secure and accurate fit, ensuring precise alignment of the workpiece during turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMyford Compatibility\u003c\/strong\u003e: Specifically designed to meet the specifications of Myford lathes, making it an ideal choice for users of these machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Bearings\u003c\/strong\u003e: Equipped with high-quality bearings that ensure smooth rotation and longevity, reducing maintenance needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Efficient\u003c\/strong\u003e: The small body design allows for better access and maneuverability, particularly in confined working areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in metalworking and machining operations where precision and reliability are crucial.\u003c\/li\u003e\n\u003cli\u003eIdeal for turning applications on Myford lathes, ensuring compatibility and optimal performance.\u003c\/li\u003e\n\u003cli\u003ePerfect for hobbyists and professional machinists requiring a compact and precise live centre for their turning projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"Only Revolving Center","offer_id":50877305127213,"sku":"10-RC-501","price":31.99,"currency_code":"USD","in_stock":true},{"title":"Revolving Center With JT2 Chuck","offer_id":50877305159981,"sku":"10-RC-502","price":75.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/with_jt2_chuck_e.jpg?v=1751009590"},{"product_id":"buyohlic-2mt-lathe-center-tool-bearing-revolving-center","title":"Buyohlic 2MT Double Bearing Lathe Pipe Cum Revolving Center Plain Body (Under 5 Microns Runout) High Precision Lathe Center Tool","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUse of product-\u003c\/strong\u003e A revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Double Bearing Lathe Pipe Cum Revolving Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRunout:\u003c\/strong\u003e Under 5 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1 Ball Bearing\u003c\/li\u003e\n\u003cli\u003e1 Taper Bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Body Case Length:\u003c\/strong\u003e 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL):\u003c\/strong\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e MT3 and MT2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e Alloy steel grade EN8D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuill\/Point Center Material:\u003c\/strong\u003e EN31 steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Design:\u003c\/strong\u003e Allows use as both a revolving\/live center and a pipe center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Capacity for Turning:\u003c\/strong\u003e 12 to 28 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision and High Quality:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned with double bearings for enhanced precision and durability.\u003c\/li\u003e\n\u003cli\u003eMaintains a runout of under 5 microns, ensuring high accuracy during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial and Construction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe body is constructed from alloy steel grade EN8D, known for its strength and toughness.\u003c\/li\u003e\n\u003cli\u003eThe quill\/point center is made from EN31 steel, providing high wear resistance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Usage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique nose design allows the tool to be used as both a revolving\/live center and a pipe center.\u003c\/li\u003e\n\u003cli\u003eSuitable for turning pipes with a diameter range of 12 to 28 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBearing Quality:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with Z type (covered) bearings.\u003c\/li\u003e\n\u003cli\u003eThese bearings are designed to lock and seal grease inside, even when it melts at high temperatures during operation, ensuring consistent performance and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"Default Title","offer_id":49612649791789,"sku":"10-RC-1301","price":52.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/PLAINBODY.jpg?v=1719385220"},{"product_id":"bull-nose-pipe-style-lathe-live-center-for-conventional-lathe","title":"Bull Nose Pipe Style Lathe Live Center for Conventional Lathe Machine Work","description":"\u003cp\u003e\u003cspan\u003e A revolving center (or live center) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Overview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bull Nose Pipe Live Revolving Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e Precision rotation of large-diameter pipes and hollow workpieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tool steel grade EN31\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Treatment:\u003c\/strong\u003e Achieves a hardness of up to 60+\/- 2 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentricity:\u003c\/strong\u003e Maintains precise concentricity with a runout of less than 5 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Options:\u003c\/strong\u003e Available with MT2, MT3, and MT4 shanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Ideal for industrial and workshop environments requiring reliable and effective machining tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Construction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from tool steel grade EN31, known for its strength and durability.\u003c\/li\u003e\n\u003cli\u003eHeat-treated to achieve a hardness of up to 60+\/- 2 HRC, ensuring long-lasting performance and resistance to wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision and Accuracy:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains precise concentricity with a runout of less than 5 microns, ensuring high machining accuracy.\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the precision rotation of large-diameter pipes and hollow workpieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility and Integration:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable with MT2, MT3, and MT4 shank options, ensuring compatibility with standard lathe setups.\u003c\/li\u003e\n\u003cli\u003eFacilitates easy integration into existing workshop equipment for efficient machining operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRobust Engineering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered to meet rigorous performance standards, combining robust construction and advanced engineering.\u003c\/li\u003e\n\u003cli\u003eIdeal for industrial and workshop environments, providing reliable and effective machining tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Usage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for a wide range of lathe operations involving large-diameter pipes and hollow materials.\u003c\/li\u003e\n\u003cli\u003eEnsures reliable performance in demanding machining tasks, enhancing workshop productivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Buyohlic International","offers":[{"title":"Morse Taper 2","offer_id":49612720537901,"sku":"10-RC-1801","price":63.5,"currency_code":"USD","in_stock":true},{"title":"Morse Taper 3","offer_id":49612720570669,"sku":"10-RC-1802","price":63.5,"currency_code":"USD","in_stock":true},{"title":"Morse Taper 4","offer_id":49612720603437,"sku":"10-RC-1803","price":63.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/sharpnose.jpg?v=1773058871"},{"product_id":"4pcs-wood-lathe-live-center-mt2-drive-spur-cup-arbor","title":"4PCS MT2 Wood Lathe Live Center MT2 Drive Spur Cup Arbor","description":"\u003ch2\u003e\u003cstrong\u003eUse of the Product\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eA drive centre is used to keep something steady and aligned while you work on it. For example, in car repairs, it helps hold parts in place. In machining or lathes, it keeps the piece you're working on centred and steady.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUpgrade your wood turning setup with this versatile 4-piece drive centre set, designed specifically for lathes equipped with a 2MT Morse Taper headstock and tailstock. This comprehensive set includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003e5\/8\" Diameter Headstock Spur Centre\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e: Ideal for narrow spindles, this centre ensures precise grip and stability for detailed turning projects.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003e1\" Diameter Headstock Spur Centre\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e: Perfect for standard spindles, providing robust support and alignment for a variety of wood turning tasks.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eLive Ball Bearing Tailstock Centre\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e: Features a cup and point design for smooth operation and minimal friction, enhancing the overall accuracy of your turns.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003ePointed Tailstock Centre\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e: Ensures reliable alignment and stability for a wide range of turning projects.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEach component is crafted for durability and precision, making this set an essential addition to any woodturner’s toolkit.\u003c\/span\u003e\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"Default Title","offer_id":49889939095853,"sku":"10-RC-2701","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/drivecentera.jpg?v=1725266672"},{"product_id":"lathe-tailstock-live-center-ml7-super-7-industrial-tool","title":"ML7 Super 7 Lathe Revolving Live Center with Self Centering Chuck Threaded Lathe Tailstock Live Center","description":"\u003ch2\u003e\u003cstrong\u003eUse of the Product\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA chuck and revolving centre are used to secure and stabilise a workpiece from both ends during rotation, ensuring accurate alignment and reducing runout for precise machining operations.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eML7 Super 7 Lathe Revolving Live Centre with Chuck of Diameter 50 mm, 65 mm and 70 mm - Tailstock MT2 Shank and MT3 Shank in M12 x 1 \u0026amp; M14 x 1 Thread, High Precision\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features \u0026amp; Description:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003ePrecision Crafted for ML7 Super 7 Lathe:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eDesigned specifically for ML7 Super 7 lathes, this high-precision revolving live centre boasts a runout within 0.01 mm, ensuring top-notch accuracy for your lathe applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eShank with Thread:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eThe revolving live centre is equipped with an MT2 shank and M14 x 1 thread, compatible with the tailstock of your lathe for secure, seamless attachment.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eIncludes Self-Centring Chuck:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eComes with a self-centring chuck, which ensures precise alignment of your workpieces. The chuck body is made of durable cast iron, while the jaws are crafted from hard tool steel for extended wear resistance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eHardened Threaded Portion:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eThe threaded portion of the revolving centre is hardened to 40-42 HRC, delivering long-lasting durability and resistance to wear, even under heavy use.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eEN8D Tool Steel Body:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eThe body of the revolving live centre is manufactured from EN8D grade tool steel, offering high strength and impact resistance essential for demanding machining tasks.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eOptimised Bearing Design:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eEquipped with 2 ball bearings and 1 taper bearing, this live centre is built to handle radial thrust effectively, ensuring smooth and reliable performance.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIdeal for hobbyists, professionals, and machinists looking for high accuracy and stability in turning applications. This revolving live centre is a perfect addition to any ML7 Super 7 lathe setup, providing outstanding reliability for intricate and precision-driven tasks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003e1 x ML7 Super 7 Lathe Revolving Live Centre with Self-Centring Chuck\u003c\/span\u003e\u003c\/p\u003e","brand":"Buyohlic International","offers":[{"title":"MT2 -M12 X 1 Thread with 50 mm 3 Jaw Self Centering Chuck","offer_id":50194155143469,"sku":"10-RC-2402","price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT2 -M12 X 1 Thread With 50 mm 4 Jaw Self Centering Chuck","offer_id":50194155176237,"sku":"10-RC-2403","price":89.99,"currency_code":"USD","in_stock":false},{"title":"MT2 -M12 X 1 Thread With 50 mm 4 Jaw Independent Chuck","offer_id":50386752897325,"sku":null,"price":89.99,"currency_code":"USD","in_stock":false},{"title":"MT2 -M14 X 1 Thread With 65 mm 3 Jaw Self Centering Chuck","offer_id":50194155209005,"sku":"10-RC-2404","price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT2 -M14 X 1 Thread With 65 mm 4 Jaw Self Centering Chuck","offer_id":50194254594349,"sku":"10-RC-2405","price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT2 -M14 X 1 Thread With 70 mm 4 Jaw Independent Chuck","offer_id":50386740052269,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT3 -M12 X 1 Thread with 50 mm 3 Jaw Self Centering Chuck","offer_id":50386752930093,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT3 -M12 X 1 Thread With 50 mm 4 Jaw Self Centering Chuck","offer_id":50386752962861,"sku":null,"price":89.99,"currency_code":"USD","in_stock":false},{"title":"MT3 -M12 X 1 Thread With 50 mm 4 Jaw Independent Chuck","offer_id":50386752995629,"sku":null,"price":89.99,"currency_code":"USD","in_stock":false},{"title":"MT3 -M14 X 1 Thread With 65 mm 3 Jaw Self Centering Chuck","offer_id":50386753028397,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT3 -M14 X 1 Thread With 65 mm 4 Jaw Self Centering Chuck","offer_id":50386753061165,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true},{"title":"MT3 -M14 X 1 Thread With 70 mm 4 Jaw Independent Chuck","offer_id":50386753093933,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/2MTShankRevolvingLiveCenterM14x1with50mm3JawSelfCenteringChuck-Latheg.jpg?v=1734947879"},{"product_id":"revolving-tailstock-center-lathe-hss-live-precision-center","title":"Lathe Live Revolving Tailstock Center with HSS Hardened Broaches Precision Centre","description":"\u003ch2\u003e\u003cstrong\u003eLive Centre with HSS Tool Bit Broach Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEnhance your precision machining with the Triple Bearing Live Revolving Centre—designed for durability and stability in demanding workshop environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003ePrecision Live Centre:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eDouble bearing MT1, 2 \u0026amp; 3 shanks ensure smooth and accurate rotation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eHigh-Quality Broaching Tool:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eComes with multiple options of robust HSS square \u0026amp; Hex broaches for efficient internal broaching.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eSturdy Design:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003e50 mm diameter body provides excellent stability during machining.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eSecure Bit Mounting:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eHSS tool bit (7.95 mm shank) is firmly held in place with a grub screw for safety and reliability.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003e120 mm overall length, including broach bit (but excluding shank that goes inside the lathe's tailstock), suits a variety of applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eComplete Square Broach Set:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eIncludes 7 HSS square broaches — 1\/8\", 5\/32\", 3\/16\", 7\/32\", 1\/4\", 5\/16\", and 3\/8\".\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eComplete Hex Broach Set:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eIncludes 7 HSS Hex broaches — 1\/8\", 5\/32\", 3\/16\", 7\/32\", 1\/4\", 5\/16\", and 3\/8\".\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cstrong\u003eWorkshop-Ready:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eIdeal for professionals in manufacturing and precision metalworking!\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eEffective Broaching Instructions (Lathe Setup)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eSafety First\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAlways wear eye protection.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEnsure the workpiece is securely clamped.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDo not exceed recommended speeds.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eKeepyour hands clear during operation.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSetup Steps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrepare the Workpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDrill or bore a pilot hole through the workpiece.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe hole should match the minor dimension of the broach (i.e., just smaller than the square size).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEnsure the hole is ccentredand free of burrs.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInstall the Live Centre Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eMount the live centre with the broaching tool in your lathe tailstock.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eEnsure the broaching tool is securely locked in place with the grub screw.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAlign the Lathe\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLine up the live centre and the chuck so they are perfectly concentric.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe broach should enter the pilot hole cleanly and without resistance.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSet the Speed\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBroaching is a low-speed process.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSet your lathe to manual feed mode, ideally under 100 RPM if rotation is required (some setups use no rotation at all—just linear feed).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBegin Broaching\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAdvance the tailstock slowly and steadily.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLet the broach shave material gradually; do not force it.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUse cutting fluid (like light oil or tapping fluid) to improve finish and reduce tool wear.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWithdraw and Clear Chips\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAfter each pass, retract the tailstock.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eClean chips from the broach flutes using a brush or air (never your fingers!).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eYou may need to make multiple light passes for deeper broaching.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eInspect the Broached Hole\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eCheck for smoothness, squareness, and full depth.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eUse a square broach gauge or test fit the corresponding square shaft.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cstrong\u003ePro Tips\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor deep broaches, use intermediate shims or spacers to support multiple passes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eWhen broaching tough materials like stainless steel, reduce feed pressure and apply generous lubrication.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eKeep broaches sharp and clean for best results\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buyohlic International","offers":[{"title":"MT1 with Square Broach Set","offer_id":50655853216045,"sku":"10-RC-2901","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT1 with Hex Broach Set","offer_id":50655853248813,"sku":"10-RC-2902","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT1 with Both Square \u0026 Hex Broaches","offer_id":50655853281581,"sku":"10-RC-2903","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT2 with Square Broach Set","offer_id":50655853314349,"sku":"10-RC-2904","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT2 with Hex Broach Set","offer_id":50655853347117,"sku":"10-RC-2905","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT2 with Both Square \u0026 Hex Broaches","offer_id":50655853379885,"sku":"10-RC-2906","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT3 with Square Broach Set","offer_id":50655853412653,"sku":"10-RC-2907","price":499.0,"currency_code":"USD","in_stock":false},{"title":"MT3 with Hex Broach Set","offer_id":50655853445421,"sku":"10-RC-2908","price":399.0,"currency_code":"USD","in_stock":false},{"title":"MT3 with Both Square \u0026 Hex Broaches","offer_id":50655853478189,"sku":"10-RC-2909","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/WhatsApp_Image_2025-04-02_at_15.20.02_1.jpg?v=1744894016"},{"product_id":"buyohlic-mini-lathe-live-center-mt0-for-precision-lathes","title":"Buyohlic Mini Lathe Live Center MT0 Live Revolving Center for Peatol \u0026 Pultra Lathes","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003ePremium Size:\u003c\/strong\u003e Small Body 23 mm Diameter Triple Bearing Live Revolving Centre. Short MT0 Shank, OAL 65 mm. Tool Steel Housing and hardened point. Run out within 0.001\" Suited for small woodworking lathes\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003ePrecision Machining:\u003c\/strong\u003e Engineered with precision machining, this centre provides accurate rotation and alignment, essential for intricate turning and shaping tasks.\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eMaterial- Tool Steel and a hardened point.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003eCompatible with lathes having MT0.\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Compatible with a wide range of mini lathes, this revolving centre easily integrates into your existing setup, offering versatility for various projects.\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003eIdeal for small to medium-sized lathes, Pultrashank live centres are suitable for precision tasks in both woodworking and metalworking, ensuring accurate and efficient machining.\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Simple to install and remove, this revolving center streamlines setup and ensures hassle-free operation, saving you time and effort.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BUYOHLIC INTERNATIONAL","offers":[{"title":"Default Title","offer_id":50840279286061,"sku":"10-RC-104","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/pultrab.jpg?v=1750337411"},{"product_id":"lathe-live-center-mt2-for-wood-lathe-true-precision-run","title":"MT2 Precision Revolving Center Woodworking 1″ x 8 TPI Tailstock Chuck Adapter Lathe Live Center Morse Taper #2 Accessory True Smooth Run","description":"\u003ch2\u003eUse of the Product\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eA revolving centre (or live centre) is used in machining to support and rotate a workpiece on a lathe or similar machine. It helps to keep the workpiece stable, centered, and aligned during cutting or shaping operations, ensuring accurate and smooth machining.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e: MT2 Morse Taper design fits most standard woodworking and metal lathes, providing secure attachment and reliable performance\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003ePRECISION DESIGN\u003c\/strong\u003e: Triple bearing system ensures smooth rotation and exceptional stability during high-speed turning operations\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eTHREADING SPECS\u003c\/strong\u003e: Features 1\" x 8 TPI thread size, making it ideal for various lathe applications and attachments\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eVERSATILE USE\u003c\/strong\u003e: Perfect for both woodworking and metalworking applications, offering consistent performance across different materials\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eCONSTRUCTION\u003c\/strong\u003e: Engineered with precision-machined components for accurate centring and reduced vibration during operation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buyohlic International","offers":[{"title":"Default Title","offer_id":51638988603693,"sku":"10-RC-2801","price":36.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/files\/51Ou3zqID_L._AC_SL1280.jpg?v=1763033908"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/8877\/3165\/collections\/2MTShankRevolvingLiveCenterM14x1with50mm3JawSelfCenteringChuck-Latheg_fb0526af-ab59-430e-8c57-443d83e969c4.png?v=1773660376","url":"https:\/\/www.buyohlic.com\/collections\/live-revolving-centers.oembed","provider":"Buyohlic","version":"1.0","type":"link"}